SIEMENS
8/15
Siemens D 21.4 · 2017
SIMOTICS servomotors
SIMOTICS S synchronous motors for SINAMICS S120
SIMOTICS S-1FT7
8
■
Technical specifications
Built-in encoder systems without
DRIVE-CLiQ interface
Built-in encoder systems with
DRIVE-CLiQ interface
S/R = signals/revolution
■
Options
-Z
must be added to the Article No. to order a motor with options.
N05
Alternative shaft geometry
The following versions are delivered with a smaller shaft
extension:
•
1FT7034-5A.71-
....
/1FT7042-5A.71-
....
•
1FT7062-5A.71-
....
/1FT7064-5A.71-
....
•
1FT7082-5A.71-
....
/1FT7084-5A.71-
....
/1FT7086-5A.71-
....
•
1FT7102-5A.71-
....
/1FT7105-5A.71-
....
/1FT7108-5A.71-
....
Shaft dimensions (diameter × length) according to shaft height
(SH):
•
SH 36:
11 × 23 mm (0.43 x 0.91 in)
•
SH 48:
14 × 30 mm (0.55 x 1.18 in)
•
SH 63:
19 × 40 mm (0.75 x 1.57 in)
•
SH 80:
24 × 50 mm (0.94 x 1.97 in)
•
SH 100: 32 × 58 mm (1.26 x 2.28 in)
N16
Version for increased chemical resistance
Please refer to the latest configuration manual for further
information.
Option N16 is available for the following naturally cooled
SIMOTICS S-1FT7 Compact motors (only up to SH 100):
• 1FT7...-5A...-1B.. AS24DQI encoder
• 1FT7...-5A...-1C.. AM24DQI encoder
• 1FT7...-5A...-1M.. AM2048S/R encoder
SIMOTICS S-1FT7 Compact/S-1FT7 High Dynamic
Motor type
Permanent-magnet
synchronous motor
Magnet material
Rare-earth magnetic material
Cooling
Natural cooling, forced ventilation,
water cooling
Temperature monitoring
Temperature sensor in stator winding
Stator winding insulation in
accordance with EN 60034-1
(IEC 60034-1)
Temperature class 155 (F) for a
winding temperature rise of
Δ
T
= 100 K at an ambient
temperature of 40 °C (104 °F).
For water cooling, max. inlet
temperature 30 °C (86 °F).
Avoid condensation.
Type of construction in
accordance with EN 60034-7
(IEC 60034-7)
IM B5 (IM V1, IM V3)
with recessed flange (more compact)
or with a flange compatible with
1FT6/1FK7
Degree of protection in
accordance with EN 60034-5
(IEC 60034-5)
IP64/IP65/IP67
Shaft extension at DE in
accordance with DIN 748-3
(IEC 60072-1)
Plain shaft/feather key and keyway
(half-key balancing)
Shaft and flange accuracy in
accordance with DIN 42955
(IEC 60072-1)
1)
Tolerance N/tolerance R
Vibration severity in accordance
with EN 60034-14 (IEC 60034-14)
Grade A is maintained up to rated
speed/Grade R
Sound pressure level
L
pA (1 m)
in accordance with EN ISO 1680,
max.
Tolerance +3 dB
Natural/water cooling
• 1FT703
• 1FT704 ... 1FT706
• 1FT708 ... 1FT713
Forced ventilation
• 1FT708 ... 1FT710
60 dB
65 dB
70 dB
73 dB
Connection
Connectors for signals and
power rotatable
Paint finish
Pearl dark gray RAL 9023
2nd rating plate
Enclosed separately
Holding brake
Without/with
Certificate of suitability
cURus
Incremental encoder
Encoder
IC2048S/R
Incremental encoder sin/cos 1 V
pp
2048 S/R
with C and D tracks
Absolute encoder
Encoder
AM2048S/R
Absolute encoder 2048 S/R,
4096 revolutions, multi-turn
Single-turn absolute encoder
2)
Encoder
AS24DQI
Absolute encoder, single-turn, 24 bit
Multi-turn absolute encoder
Encoder
AM24DQI
Absolute encoder, 24 bit
+ 12-bit multi-turn
1)
Shaft extension run-out, concentricity of centering ring and shaft, and
perpendicularity of flange to shaft.
2)
The single-turn absolute encoder is used for the previous incremental
encoders.
3)
Additional plain text required.
Order code
Description
J..
Mounting of SP+ planetary gearbox
(see SIMOTICS S geared motors)
K20
Reinforced bearing with transverse forces as specified in the
latest configuration manual
(S-1FT7 Compact only, in conjunction with flange compatible
with S-1FT6/S-1FT7)
L03
Version for increased vibration stress
(information about validity and specification can be found in
the latest configuration manual)
N05
Alternative shaft geometry
N16
Version for increased chemical resistance
N40
Stainless-steel shaft and coating for increased chemical
resistance (information about validity and specification can be
found in the latest configuration manual)
Q12
Sealing air connection
(Only in conjunction with degree of protection IP67. Not in
combination with terminal box)
Y84
Customer specifications on rating plate (max. 30 characters)
3)
Paint finish
K23
Special paint finish for "Worldwide" climate group:
Primer and paint finish: Anthracite RAL 7016
K23
+
X..
Special paint finish for "Worldwide" climate group:
Primer and other paint finish can be selected from
X01 to X09
K24
Primed (unpainted)
X01
Paint finish: Jet black, matt RAL 9005
X02
Paint finish: Cream white RAL 9001
X03
Paint finish: Reseda green RAL 6011
X04
Paint finish: Pebble gray RAL 7032
X05
Paint finish: Sky blue RAL 5015
X06
Paint finish: Light ivory RAL 1015
X08
Paint finish: White aluminum
X09
Paint finish: Anthracite RAL 7016
© Siemens AG 2017