SIEMENS
12/7
Siemens D 21.4 · 2017
MOTION-CONNECT connection systems
Power cables for SINAMICS S120/Hybrid cables for SINAMICS S120M
12
■
Overview
Power cable for connecting a SIMOTICS motor to a
SINAMICS S120 Motor Module, C/D type
Power cables
The synchronous and asynchronous motors are connected to
the Motor Modules or Power Modules by means of
MOTION-CONNECT power cables.
The pre-assembled MOTION-CONNECT power cables are of
high quality and offer safety with problem-free functioning.
Depending on the design, the MOTION-CONNECT power
cables are either pre-assembled at one end or at both ends.
If pre-assembled power cables are to be installed in a cable
carrier in such a way that the connector would inhibit assembly,
pre-assembled cables without assembled connector can also
be supplied. In this case, the contacts of the cables are crimped
and the connector is supplied separately. After installing the
cables, the customer assembles the connector.
The 6FX.002-5
....
-
....
power cables are available with crimped
contacts and with the connector supplied separately as an
option (not applicable to power cables with open core ends
or cable lugs).
Power cables with
separately supplied
module-end
connector:
in this case, the 6th position of the Article No. must be changed
from
0
to
1
: 6FX.0
1
2-5
....
-
....
(not for power cables for
SINAMICS S120 Power Modules or Motor Modules in booksize
compact format).
Power cables without
module-end
connector:
in this case, the 6th position of the Article No. must be changed
from
0
to
2
: 6FX.0
2
2-5
....
-
....
The connector can be ordered separately (see page 12/53).
Power cables with separately supplied
motor-end
connector:
in this case, the 6th position of the Article No. must be changed
from
0
to
4
: 6FX.0
4
2-5
....
-
....
(not for power cables with open core
ends on the motor end).
Type of delivery for pre-assembled power cables
Pre-assembled power cables can be ordered in units of 10 cm
(3.94 in) up to a maximum length of 299 m (981 ft).
The cables are supplied on reels up to 30 kg (66.1 lb) or 100 m
(328 ft). Above 30 kg or 100 m (66.1 lb or 328 ft), cable drums
are used instead of reels. This applies to both pre-assembled
power cables and for cables sold by the meter.
Power cable with separately supplied connector for connecting a
SIMOTICS motor to a SINAMICS S120 Motor Module, C/D type
Type of delivery for power cables sold by the meter
Fixed lengths
Variable length, available in exact meter lengths
Hybrid cables
Hybrid cables connect AM600 Adapter Modules to the distrib-
uted components Hybrid Cabinet Bushings, DRIVE-CLiQ Exten-
sion and SINAMICS S120M, as well as the distributed compo-
nents to one another. Hybrid cables are only delivered pre-
assembled.
Type of delivery for pre-assembled hybrid cables
The pre-assembled cables can be delivered in length units of
10 cm (3.94 in) up to 75 m (246 ft) to suit the system.
Cross-
section
Brake cores
MOTION-CONNECT 500
MOTION-CONNECT 800PLUS
1.5 mm
2
without/with
50 m (164 ft), 100 m (328 ft), 200 m (656 ft),
500 m (1641 ft)
2.5 mm
2
without/with
50 m (164 ft), 100 m (328 ft), 200 m (656 ft),
500 m (1641 ft)
Cross-sec-
tion
Brake cores
MOTION-CONNECT
500
MOTION-CONNECT
800PLUS
4 mm
2
without/with
≤
500 m (1641 ft)
≤
500 m (1641 ft)
6 mm
2
without/with
≤
500 m (1641 ft)
≤
500 m (1641 ft)
10 mm
2
without/with
≤
500 m (1641 ft)
≤
500 m (1641 ft)
16 mm
2
without/with
≤
200 m (656 ft)
≤
200 m (656 ft)
25 mm
2
without
≤
200 m (656 ft)
–
with
≤
200 m (656 ft)
≤
200 m (656 ft)
35 mm
2
without
≤
200 m (656 ft)
–
with
≤
200 m (656 ft)
≤
200 m (656 ft)
50 mm
2
without
≤
200 m (656 ft)
–
with
≤
200 m (656 ft)
≤
200 m (656 ft)
70 mm
2
without
≤
100 m (328 ft)
–
95 mm
2
without
≤
100 m (328 ft)
–
120 mm
2
without
≤
100 m (328 ft)
–
© Siemens AG 2017