SIEMENS
4/11
Siemens CR 1 · 2015
4
SIMOCRANE CMS Crane Management System
SIMOCRANE CMS Lean and CMS Basic
Single-user
■
Overview
The local CMS station is directly located on the crane. Depen-
ding on the size of the crane, it comprises a single operator
station (CMS Lean or CMS Basic) or a Webserver for additional
operator panels (CMS with WebClients – WebNavigator). The
CMS station is directly connected to the crane controller and
acquires all the relevant operational data.
Examples:
•
Ladle crane
•
Goliath crane
•
Slewing luffing crane
Requirements:
•
Acquisition of productivity data and archiving
•
Alarm/event reporting system with archiving
•
Error logs and productivity data logs
•
Replay function for playback
•
Visualization of the crane and individual components
•
CMS display should be installed in the crane driver cabin
Example of solution:
CMS Lean
Article No.
6GA7214-0AA00-0AA0
Panel PC 477 as the HMI device and CMS PC for example (this
article number can be also different, depending of the Panel PC
configuration: processor, RAM memory, hard drive as SSD, etc.):
Article No.
6AV7240-3CC07-0HA0
Further information: See "Technical specifications", "Selection
and ordering data" and the SIMATIC HMI Catalog ST 80
.
■
Application
•
Non-networked single-crane applications in which the focus is
on the local application and less on remote access and data
evaluation possibilities. Visualization of crane components
and the alarm/event system are the most important compo-
nents here.
G_CR01_XX_00254
© Siemens AG 2015