SIEMENS
SINAMICS DCM
DC Converter and Control Module
DC Converter
3/37
Siemens D 23.1 · 2014
3
■
Options
(continued)
S01
Memory card left
With option S01, users receive a memory card for one Standard
CUD or one Advanced CUD, which is inserted in the left-hand
slot.
This memory card offers the following options:
•
Additional languages can be downloaded to the AOP30
Advanced Operator Panel. When using two CUDs, option S01
and option S02 must be ordered.
•
Perform an offline long-time trace.
•
Download the DCC block library into the drive.
•
Update the firmware.
The SINAMICS Link function requires that the memory card is
always inserted.
S02
Memory card right
With option S02, users receive a memory card for one Standard
CUD or one Advanced CUD, which is inserted in the right-hand
slot.
This memory card offers the following options:
•
Additional languages can be downloaded to the AOP30
Advanced Operator Panel. When using two CUDs, option S01
and option S02 must be ordered.
•
Perform an offline long-time trace.
•
Download the DCC block library into the drive.
•
Update the firmware.
The SINAMICS Link function requires that the memory card is
always inserted.
In order to be able to use option S02, a Standard CUD right
(option G10) or an Advanced CUD right (option G11) is required.
S50
Switchover of the power section topology
In certain applications, it is necessary to switch between 12-
pulse parallel connection and 12-pulse series connection during
operation by means of control command.
External contactors must be used to switch over the power
section topology. Option S50 provides the required firmware
functionality.
Requirements for using this functionality:
•
All units involved must be equipped with option S50.
•
No redundant operation mode ("n+m" mode) may be used.
•
The function of the "parallel switching master" must remain on
the same unit in both power section topologies.
Q80
to
Q85
Extension of the liability for defects
We can offer you the possibility of extending the liability for
defects periods beyond the standard liability for defects period.
The standard liability for defects period, as listed in our standard
conditions for the supply of services and products, is 12 months.
The following extension periods are available:
The currently valid conditions for extending the period of liability
for defects can be found at:
Extension of the liability for defects period for converters
Additional
identification
code
-Z
with order code
Additional text
Q80
Extension of the liability for defects period by
12 months to a total of 24 months (two years) from
delivery
Q81
Extension of the liability for defects period by
18 months to a total of 30 months (2½ years) from
delivery
Q82
Extension of the liability for defects period by
24 months to a total of 36 months (three years) from
delivery
Q83
Extension of the liability for defects period by
30 months to a total of 42 months (3½ years) from
delivery
Q84
Extension of the liability for defects period by
36 months to a total of 48 months (four years) from
delivery
Q85
Extension of the liability for defects period by
48 months to a total of 60 months (five years) from
delivery
© Siemens AG 2014