SIEMENS
4/30
Siemens D 11 · 2015
■
Technical specifications
(continued)
4
SINAMICS G150
Drive converter cabinet units
75 kW to 2700 kW
General technical specifications
Deviations from the specified classes are underlined
.
Electrical specifications
Single connection
Parallel connection
Line voltages and power
ranges
• 380 ... 480 V 3 AC ±10% (-15% < 1 min)
110 ... 560 kW
630 ... 900 kW
• 500 ... 600 V 3 AC ±10% (-15% < 1 min)
110 ... 560 kW
630 ... 1000 kW
• 660 ... 690 V 3 AC ±10% (-15% < 1 min)
75 ... 800 kW
1000 ... 2700 kW
Line system configurations
Grounded TN/TT systems or ungrounded IT systems (a grounded line conductor is not permissible in 690 V line supplies)
Line frequency
47 ... 63 Hz
Output frequency
0 ... 550 Hz
1)
Line power factor
- Fundamental
> 0.96
- Total
0.75 ... 0.93
Efficiency
> 98%
Overvoltage category
III according to EN 61800-5-1
Control method
Vector control with and without encoder or V/f control
Fixed speeds
15 fixed speeds plus 1 minimum speed, parameterizable
(in the default setting, 3 fixed setpoints plus 1 minimum speed are selectable using terminal block / PROFIBUS)
Speed ranges that can be
skipped
4, parameterizable
Setpoint resolution
0.001 rpm digital
12-bit analog
Braking operation
Optional via braking unit
Mechanical specifications
Degree of protection
IP20 (higher degrees of protection up to IP54 optional)
Protection class
I according to EN 61800-5-1
Touch protection
EN 50274 / BGV A3 when used for the intended purpose
Cabinet system
Rittal TS8, doors with double-bit key, three-section base plates for cable entry
Paint finish
RAL 7035 (indoor requirements)
Cooling method
Forced air cooling AF according to EN 60146
Ambient conditions
Storage
Transport
Operation
Ambient temperature
-25 ... +55° C
-25 ... +70° C
as of -40° C
for 24 hours
0
... +40° C
to +50° C
see derating data
Relative humidity
(condensation not
permissible)
5 ... 95%
5 ... 95%
at 40° C
5 ... 95%
Class 1K4 according to EN 60721-3-1
Class 2K3 according to EN 60721-3-2
Class 3K3 according to EN 60721-3-3
Environmental class / harm-
ful chemical substances
Class 1C2 according to EN 60721-3-1
Class 2C2 according to EN 60721-3-2
Class 3C2 according to EN 60721-3-3
Organic/biological
influences
Class 1B1 according to EN 60721-3-1
Class 2B1 according to EN 60721-3-2
Class 3B1 according to EN 60721-3-3
Degree of pollution
2 according to EN 61800-5-1
Installation altitude
Up to 2000 m above sea level without derating; > 2000 m
see derating data
Mechanical stability
Storage
Transport
Operation
Vibratory load
- Deflection
1.5 mm at 5
... 9 Hz
3.1 mm
at 5
... 9 Hz
0.075 mm at 10 ... 58 Hz
- Acceleration
5 m/s
2
at > 9 ... 200 Hz
10 m/s
2
at > 9 ... 200 Hz
10 m/s
2
at > 58 … 200 Hz
Class 1M2 according to EN 60721-3-1
Class 2M2 according to EN 60721-3-2
–
Shock load
- Acceleration
40 m/s
2
for 22 ms
100 m/s
2
for 11 ms
100 m/s
2
for 11 ms
Class 1M2 according to EN 60721-3-1
Class 2M2 according to EN 60721-3-2
Class 3M4 according to EN 60721-3-3
Compliance with standards
CE marking
According to EMC Directive No. 2004/108/EC and Low Voltage Directive No. 2006/95/EC and
Machinery Directive No. 2006/42/EC for functional safety
Radio interference
suppression
The SINAMICS G150 converter systems are not designed for connection to the public power network ("first environment").
Radio interference suppression is compliant with the EMC product standard for variable-speed drives EN 61800-3, "Second
environment" (industrial networks). EMC disturbances can occur when connected to the public power networks. However, if
supplementary measures are taken (e.g. line filter, see option
L00
) operation in the "first environment" is possible.
2)
1)
The output frequency is also affected by the selected control method and
the pulse frequency.
For further information, please refer to the SINAMICS
Low Voltage Engineering Manual.
2)
Applies to motor cable lengths < 100 m.
© Siemens AG 2015