SIEMENS
7/91
Siemens IK PI · 2015
Industrial Remote Communication
TeleControl Professional
Stations for DNP3 protocol
TIM 3V-IE DNP3
7
■
Technical specifications
Article No.
6NH7803-3BA00-0AA0
Product-type designation
TIM 3V-IE DNP3
Transmission rate
Transfer rate
• for Industrial Ethernet
10 … 100 Mbit/s
• in accordance with RS 232
9 600 … 38 400 bit/s
Interfaces
Number of interfaces according
to Industrial Ethernet
1
Number of electrical connections
• for external data transmission
in accordance with RS 232
1
• for power supply
1
Design of electrical connection
• the Industrial Ethernet Interface
RJ45 port
• at interface 1
for external data transmission
9-pin Sub-D connector (RS232)
• at interface 2
for external data transmission
-
• for power supply
2-pin, plug-in terminal strip
design of the removable storage
C-PLUG
No
Supply voltage,
current consumption, power loss
Type of supply voltage
DC
Supply voltage
24 V
• minimum
20.4 V
• maximum
28.8 V
Consumed current
• from backplane bus at 24 V for DC
maximum
0.2 A
• from external supply voltage at 24 V
with DC maximum
0.2 A
Resistive loss
5.8 W
Product expansion optional backup
battery
No
Type of battery
-
Backup current
• typical
-
• maximum
-
Permitted ambient conditions
Ambient temperature
• during operating
0 … 60 °C
• during storage
-40 … +70 °C
• during transport
-40 … +70 °C
Relative humidity at 25 °C without
condensation during operating maxi-
mum
95 %
Protection class IP
IP20
Design, dimensions and weight
Module format
Compact module S7-300 single width
Width
40 mm
Height
125 mm
Depth
120 mm
Net weight
0.25 kg
Product properties, functions,
components
general
Number of modules note
Number of TIMs per S7-300: 1
Cable length
• with RS 232 interface maximum
6 m
• with RS 485 interface maximum
-
Performance data
Performance data
S7 communication
Number of possible connections
for S7 communication
• maximum
3
• with PG connections maximum
2
• with OP connections maximum
1
• note
only via LAN
Service
• SINAUT ST7
through S7 communication
-
• PG-/OP-communication
Yes
Performance data
multi-protocol mode
Number of active connections
with multiprotocol mode
-
Performance data
telecontrol
Suitability for use
• node station
Yes
• substation
Yes
• control center
Yes
• note
-
Protocol is supported
• TCP/IP
Yes
• DNP3
Yes
• SINAUT ST1 protocol
No
• SINAUT ST7 protocol
No
Number of DNP3 masters
• with Ethernet maximum
8
• with RS 232 interface maximum
1
Product function data buffering
if connection is aborted
Yes
• note
64 000 data points with one master
Product functions
management,
configuration
Configuration software required
SINAUT ST7 ES
Storage location of TIM configuration
data
On the CPU or TIM
Article No.
6NH7803-3BA00-0AA0
Product-type designation
TIM 3V-IE DNP3
© Siemens AG 2014