SIEMENS
7/109
Siemens IK PI · 2015
7
■
Design
(continued)
Industrial Remote Communication
SIMATIC Teleservice
TeleService
TS Adapter II
Main features of TS Adapter II:
•
Single-width standard S7-300 housing
•
Mounted onto DIN or S7-profile rail, therefore no time-
consuming cabinet installation required using a mounting
plate
•
Integral modem, either analog or ISDN as required
•
USB interface for parameterization. This interface can also be
used locally as a programming interface for the connected
devices
•
Serial RS232 interface for connecting external modems
(e.g. wireless modem)
•
Firmware with update capability
•
Power supply over MPI or over external 24 V power supply
•
Connection of an external modem, e.g. a GSM wireless
modem, over serial interface
•
Can be connected to:
- MPI
- PROFIBUS DP up to 12 Mbit/s (previously 1.5 Mbit/s)
- PPI
Scope of delivery:
The following components are supplied with the TS Adapter II:
•
DVD with driver
•
TeleService software V6.1 (Can be used for 14 days).
For further operation, a license is required)
•
MPI cable, 0.8 m, for connecting the adapter to the MPI/DP
interface
•
Standard telephone cable, 3 m, with RJ12 connectors
(only for TS Adapter II modem)
•
Standard telephone cable, 3 m, with RJ45 connectors
(only for ISDN TS Adapter II)
•
TAE6N plug (only for TS Adapter II modem)
When using the TS Adapter II modem outside Germany, a
standard national telephone plug can be snapped onto the RJ12
connector.
A TAE6N connector is supplied for Germany. In some
countries, telephone sockets with RJ12 sockets are available, in
which case telephone cables can be used without the need for
a telephone plug.
For operation, TeleService Software Version 6.0 is required.
TS Adapter IE
Main features of TS Adapter IE:
•
Single-width standard S7-300 housing
•
Mounting on DIN or S7 rail
•
Integral modem, either analog or ISDN as required
•
Firmware with update capability
•
Power supply over external 24 V power supply
•
Serial interface for connection of an external modem,
e.g. a GSM wireless modem
•
An RJ45 Ethernet interface (10/100 Mbit/s)
•
Industry-compatible in accordance with SIMATIC standard
Parameterization:
The TS Adapter IE can be parameterized locally or over a remote
link. TeleService software V6.1 or an Internet browser is used for
this purpose.
The firewall is parameterized easily by selecting and deselecting
the appropriate services with a click of the mouse button.
In "expert mode", the adapter can also be parameterized like a
standard router.
Security:
Only dial-in access is possible: The service engineer dials into
the adapter using a supplied telephone number. Authentication
is performed by means of a user log-in with a password and
Challenge Handshake Authentication Protocol (CHAP).
Up to 8 user accounts can be created with different log-ins and
passwords.
As an option, e.g. for security reasons or to save telephone
charges, the TS Adapter IE will interrupt the connection following
correct authentication and call the user back on the telephone
number stored in the TS Adapter IE.
The implemented firewall protects the plant from unauthorized
access over the Internet. By default, the firewall only permits
S7 communication. The required services, e.g. Sm@rt-Access,
Sm@rt-Service or PCAnywhere, can be individually enabled
during parameterization. For sending e-mails, it is necessary to
enable the SMTP protocol and to set the parameters for outgoing
calls. It is also possible to block all incoming data packets
during connection to the Internet.
Scope of delivery:
The following components are supplied with the TS Adapter IE:
•
CD with drivers and TeleService V 6.1 software (can be used
for 2 weeks without a license) including standard software for
sending e-mails from S7 CPUs
•
Standard telephone cable, 3 m, with RJ12 connectors
(only for TS Adapter IE modem)
•
Standard telephone cable, 3 m, with RJ45 connectors
(only for ISDN TS Adapter IE)
•
TAE6N plug (only for TS Adapter IE modem)
When using the analog TS Adapter IE outside Germany, a
standard country-specific telephone plug can be snapped onto
the RJ12 connector. A TAE6N connector is supplied for
Germany. In some countries, telephone sockets with RJ12
sockets are available, in which case telephone cables can be
used without the need for a telephone plug.
© Siemens AG 2014