SIEMENS
6/35
Siemens D 31 N · March 2016
6
■
Accessories
SINAMICS G110M distributed inverters
0.37 kW to 4 kW (0.5 hp to 5 hp)
Supplementary system components
Connecting cables and connectors
for digital inputs and outputs
Selection and ordering data
Connecting cables and connectors for analog inputs
Selection and ordering data
Connecting cables for Power Modules
Connecting cables pre-assembled at one end and
connector sets to connect to the line supply
Selection and ordering data
Connector insert for power loop-through
Selection and ordering data
Description
Article No.
M12 plug-in cable pre-assembled at
both ends, axial outlet
M12 straight plug, M12 straight socket,
screw mounting, 3-pole, 3 x 0.34 mm²,
A-coded, black PUR sheath, max. 4 A
Length:
• 1.5 m (4.92 ft)
3RK1902-4PB15-3AA0
M12 connector
Y cable for distributed I/Os for dual connec-
tion of I/Os using single 5-pole M12 cables,
200 mm (7.87 in)
• Straight
6ES7194-6KA00-0XA0
Description
Article No.
M12 cable connector
8-pole plug connector
• Straight cable outlet
Ordered from and supplied
by KnorrTec
T distribution piece
To connect two analog inputs
8-pole M12 male connector to 2 × 4-pole
M12 socket, angled
Ordered from and supplied
by KnorrTec
Description
Article No.
Connecting cable
pre-assembled at one end
Power supply cable, open at one end,
for HAN Q4/2, angled, 4 × 4 mm
2
• 1.5 m (4.92 ft) long
3RK1911-0DB13
• 5 m (16.41 ft) long
3RK1911-0DB33
Connector set for the power supply
Female contact insert HAN Q4/2,
5 socket contacts, grommet housing,
angled outlet including screw connection
• 2.5 mm
2
3RK1911-2BE50
• 4 mm
2
3RK1911-2BE10
• 6 mm
2
3RK1911-2BE30
Description
Article No.
Connector set for power loop-through
Plug insert HAN Q4/2, 4 socket contacts,
grommet housing, angled outlet including
screw connection
• 2.5 mm
2
3RK1911-2BF50
• 4 mm
2
3RK1911-2BF10
Power bus distribution 400 V in IP65 degree of protection
Selection and ordering data
Not essential (daisy chaining within device); use is optional.
■
More information
An overview of further supplementary products (e.g. connectors
and cables) can be found under the following link:
/distributeddrives-supplementaryproducts
For further information about the connecting cables and plug-in
connectors mentioned above, please refer to Catalog IK PI.
Further selected accessories are available from
Siemens Solution Partners.
Please go to the "Solution Partner Finder" and select technology
"Distributed Field Installation System".
/automation/partnerfinder
Description
Article No.
(Ordering see
Solution Partner)
Power T clamp connector
for 2.5 ... 6 mm
2
With attached 7-pole connector,
female contact insert, grommet housing, UL
Seals for various cable cross-sections
must be ordered separately
Ordered from and supplied
by Harting
T clamp connector
Completely pre-assembled
Ordered from and supplied
by KnorrTec
T distributor box, IDC connection
power cable
Pre-assembled, UL, uncut power cable,
2.5 ... 6 mm
2
Push-in connection: 1.5 ... 6 mm
2
Seals for various cable cross-sections
must be ordered separately
Ordered from and supplied
by Weidmüller
Y distributor
For direct connection of 400 V supply line,
HAN Q4/2, conductor cross-section
1.5 ... 4 mm
2
Ordered from and supplied
by Harting
© Siemens AG 2016