SIEMENS
SINAMICS S150 NEMA
Enclosed drive
2
Siemens D21.7
(Part 2) – 2015
2/6
Options
1)
This option is not yet UL listed and cannot be included in a UL listed drive.
Option code
Description
Comment
Enclosure Options
M06
Base (plinth) 4” (100 mm)
M07
Base (plinth) 8” (200 mm)
M13
Line side top cable entry
Only for input current rating >800 A @ 460 V, >600 A @ 575 V
M23
Enclosure NEMA 1 filtered
M43
Enclosure IP43
M54
Enclosure NEMA 12 (ventilated)
Requires current derate (refer to page 3/3)
M78
Motor side top cable exit
M90
Lifting beam/eye bolts
Recommended: Required to lift the drive off pallet
Y09
Special enclosure paint color (specify color)
Please specify required color in text
Power Options
L04
Infeed module one size smaller
L08
Motor reactor
L10
Output dV/dt filter with VPL (voltage peak limiter)
May require add-on options cabinet
L40
Filter (AIM) monitoring
L61
Braking unit 25/125 kW, 480 V (for 150 HP to 200 HP)
L62
Braking unit 50/250 kW, 480 V (for 250 HP to 1,150 HP)
L64
Braking unit 25/125 kW, 600 V (for 75 HP to 125 HP)
L65
Braking unit 50/250 kW, 600 V (for 150 HP to 1,250 HP)
L70
High SCCR (short circuit current rating) 84 or 100 kA
L87
Insulation Monitor for ungrounded supplies
L96
Input surge protective device Type 1 per UL1449
Miscellaneous Options
L17
Feeder for external auxiliaries (line volts) 3ph. AC, max. 10 A
L50
Enclosure light with power outlet 120 V, 1ph AC, 5 A
L55
Enclosure space heater
U90
UL listing per UL508A
Requires options M23 or M43 or M54
U91
cUL listing for Canada per UL508A
Requires options M23 or M43 or M54, and T58
Control Options
G20
CBC10 communication board CANopen
G22
MODBUS RTU (to PROFIBUS) communication converter
G33
CBE20 Communication Board Ethernet, SINAMICS link or PROFINET or Ethernet/IP
G51
TM150 Terminal Module for temperature (RTD) monitoring
G52
Qty. 2 of TM150 Terminal Module for temperature (RTD) monitoring
G61
Additional TM31 terminal module for digital and analog I/O
G65
TM31 I/O wired to customer terminal strip
G66
Additional TM31 (opt. G61)
I/O wired to customer terminal strip
K01
SAFETY
Safety license (for 1 axis)
K46
SMC10 sensor module for speed/position feedback
K48
SAFETY
SMC20 sensor module for speed/position feedback
K50
SAFETY
SMC30 sensor module for speed feedback
K51
VSM10 voltage sensing module
K52
SAFETY
Additional SMC30 sensor module
K82
SAFETY
Terminal interface for Safety Integrated functions STO and SS1
K87
SAFETY
TM54F Terminal Module (requires option K01)
K88
1)
SAFETY
Safe Brake Adapter SBA, 230 V AC
K95
Control unit CU320-2 PN (PROFINET)
N55
ALL STOP (mushroom pushbutton), coast to stop
N57
EMERGENCY OFF category 0, 120 V or 24 V, coast to stop
N59
EMERGENCY STOP category 1, 120 V, controlled ramp down
N60
EMERGENCY STOP category 1, 24 V, controlled ramp down
N70
Control power supply 120 V 1 ph AC, 5 A
Documentation and Languages
D02
Customer drawings in dxf format
Standard: In pdf format only
D04
Customer documentation in paper format, one set
Standard: In electronic format only
D14
Advance copy of customer documentation (pdf)
Standard: Documents ship with drive
D58
Documentation English/French
Standard: Documentation English/Spanish
T58
Nameplate English/French
For additional languages, please consult factory
Testing
F03
Visual inspection by customer
F71
Witnessed function test without motor
F75
Witnessed function test with test-bay motor, no load
F77
Witnessed test incl. high-voltage and insulation test (only additional to option F71 or F75)
F97
Witnessed customer specific test (on request)