SIEMENS
3/290
Siemens IK PI · 2015
PROFIBUS
SIMOCODE 3UF Motor Management and Control Devices
SIMOCODE pro
Expansion modules
3
■
Selection and ordering data
(continued)
1)
Possible with pro V basic unit from product version E10 or
pro V PN basic unit from product version E04.
Version
Screw terminals
Article No.
Expansion modules for SIMOCODE pro V
With SIMOCODE pro V, it is possible to expand the type and number of inputs and
outputs in steps. Each expansion module has two system interfaces on the front.
Through the one system interface the expansion module is connected to the system
interface of the SIMOCODE pro V using a connection cable;
through the second system interface, further expansion modules or the operator panel
can be connected. The power supply for the expansion modules is provided by the
connection cable through the basic unit.
Note:
Please order connection cable separately, see page 3/293.
3UF7300-1AU00-0
Digital modules
Up to two digital modules can be used to add additional binary inputs and relay
outputs to the basic unit. The input circuits of the digital modules are
supplied from an external power supply.
4 binary inputs and 2 relay outputs,
up to 2 digital modules can be connected
Relay outputs
Input voltage
Monostable
24 V DC
3UF7300-1AB00-0
110 ... 240 V AC/DC
3UF7300-1AU00-0
Bistable
24 V DC
3UF7310-1AB00-0
110 ... 240 V AC/DC
3UF7310-1AU00-0
3UF7400-1AA00-0
Analog modules
Basic unit can be optionally expanded with analog inputs and outputs (0/4 ... 20 mA)
by means of the analog module.
2 inputs (passive) for input and 1 output for output of 0/4 ... 20 mA signals,
max. 1 analog module can be connected per pro V basic unit
and max. 2 analog modules per pro V PN basic unit
3UF7400-1AA00-0
3UF7510-1AA00-0
Ground-fault modules
1)
Ground-fault monitoring using 3UL23 residual-current transformers and ground-fault
modules is used in cases where precise detection of the ground-fault current is required
or power systems with high impedance are grounded.
With the ground-fault module, it is possible to determine the precise fault current
as a measured value,
and to define freely selectable warning and trip limits in a wide range from 30 mA ... 40 A.
1 input for connecting a 3UL23 residual-current transformer, up to
1 ground-fault module can be connected
Note:
See Catalog IC 10 for residual current transformers.
3UF7510-1AA00-0
3UF7700-1AA00-0
Temperature modules
Independently of the thermistor motor protection of the basic units,
up to 3 analog temperature sensors can be evaluated using a temperature module.
Sensor types: PT100/PT1 000, KTY83/KTY84 or NTC
3 inputs for connecting up to 3 analog temperature sensors,
up to 1 temperature module can be connected per pro V basic unit
and max. 2 temperature modules per pro V PN basic unit
3UF7700-1AA00-0
© Siemens AG 2014