SIEMENS
2/360
Siemens IK PI · 2015
PROFINET/Industrial Ethernet
Industrial Ethernet Layer 3 Switches / Routers
SCALANCE X-400 managed
2
■
Overview
The SCALANCE X-400 product range comprises modular
Industrial Ethernet switches expandable with various media
modules and, in some cases, with extenders. It supports
10/100/1 000 Mbit technology for various transmission media
(twisted pair, fiber optic) and increased port requirements. The
main applications are high-performance plant networks (control
level). Thanks to its partly modular design, the X-400 product
line is also designed for future requirements and can be adapted
to the relevant task.
•
Two to four integral Gigabit Ethernet twisted pair interfaces
(10/100/1 000 Mbit/s) for connecting several switches to each
other; node connection via the Fast Ethernet twisted pair ports
(10/100 Mbit/s) integrated into the basic unit
•
SCALANCE X414-3E;
another eight nodes can be connected to the basic unit via
extender modules;
the following extender modules are available:
- Extenders with eight Fast Ethernet twisted-pair ports
- Extenders with four media module slots for up to eight Fast
Ethernet fiber optic ports
•
High-speed media redundancy through integral redundancy
manager even for large networks, for both Gigabit Ethernet
and Fast Ethernet
•
For the construction of optical Gigabit Ethernet rings, the
integrated Gigabit Ethernet ports can be converted to fiber
optic via a 2-port Gigabit Ethernet media module (MM).
•
By means of pluggable 2-port Fast Ethernet media modules
for multimode or alternatively single-mode fiber-optic cable,
SCALANCE X-400 switches can also be integrated into
100 Mbit/s rings, e.g. with SCALANCE X204-2. In this way,
even remote nodes can be connected optically.
•
Remote diagnostics by means of PROFINET diagnostics, CLI,
Web browser, or SNMP
•
Seamless integration of automation networks into existing
corporate networks thanks to support for a host of IT
standards: Establishment of virtual networks (VLANs)
•
Integration into higher-level enterprise networks thanks to
support for standardized redundancy procedures (Rapid
Spanning Tree Protocol)
•
By learning the Multicast sources and targets (IGMP:
I
nternet
G
roup
M
anagement
P
rotocol snooping), SCALANCE X-400
switches can also filter Multicast data traffic and therefore limit
the load in the network.
•
Creation of IP subnets and IP router communication by means
of Layer 3 switching (IP routing) on SCALANCE X414-3E
- Static routing
-
Dynamic routing OSPF (Open Shortest Path First) and RIPv2
(Routing Information Protocol)
- Redundant routing VRRP (Virtual Router Redundancy
Protocol)
SCALANCE X408-2/SCALANCE X414-3
Communication connections
•
Integral Gigabit Ethernet twisted pair ports
(10/100/1 000 Mbit/s, RJ45 sockets) for interconnecting
the SCALANCE X-400 switches:
-
SCALANCE X408-2:
4 Gigabit Ethernet twisted pair ports
-
SCALANCE X414-3E:
2 Gigabit Ethernet twisted pair ports
•
Integral Fast Ethernet twisted pair ports (10/100 Mbit/s, RJ45
sockets with retaining collars) for node connection
-
SCALANCE X408-2:
4 Fast Ethernet twisted pair ports
-
SCALANCE X414-3E:
12 Fast Ethernet twisted pair ports
•
The Gigabit Ethernet ports can be converted to fiber-optic
connections with optical Gigabit Ethernet media modules
Only for
SCALANCE X408-2
•
Two universal slots either for optical Fast Ethernet or Gigabit
Ethernet media modules with two ports
Only for
SCALANCE X414-3E
•
Two slots for optical Fast Ethernet media modules with two
ports
•
One extender interface for expansion by 8 Fast Ethernet ports
(twisted pair or fiber optic, depending on extender version).
In this way, a maximum configuration of two Gigabit Ethernet
Ports (electrical or optical) and up to 24 Fast Ethernet ports
(of which between 2 and 12 can be optical) is possible.
The maximum installation width including extender is 19".
Interfaces
:
•
Console port (serial interface) for on-site parameterization/
diagnostics, for firmware update
•
Slot for C-PLUG swap media for easy device replacement
(included in scope of supply)
•
Redundant 24 V DC supply; two feeds are available for
protection against voltage failure
•
One floating message output for simple display of faults
Only for
SCALANCE X414-3E
•
Additional out-band Ethernet port for on-site parameterization/
diagnostics
•
Eight floating inputs for recording digital status information
such as signal contacts of PROFIBUS OLM or door contacts
and forwarding via SCALANCE X-400 diagnostic paths
(LED indicator, log table, trap or Email)
Extensive operating mode and status information is displayed
via LEDs and selection buttons.
© Siemens AG 2014