SIEMENS
FLENDER Standard Couplings
Highly Flexible Couplings — ELPEX-B Series
General information
10/2
Siemens MD 10.1 · 2015
10
■
Overview
ELPEX-B couplings are highly flexible and free of torsional back-
lash. Because of their low torsional stiffness and damping ca-
pacity, ELPEX-B couplings are especially suitable for coupling
machines with a highly non uniform torque pattern. ELPEX-B
couplings are also suitable for connecting machines with high
shaft misalignment.
Standard ELPEX-B coupling types are designed as shaft-shaft
connections. Application-related types can be manufactured on
request.
■
Benefits
The ELPEX-B coupling is suitable for horizontal and vertical
mounting positions or mounting positions at any required angle.
The elastic tire is slit at the circumference and can be changed
without having to move the coupled machines.
The elastic tire is fitted without backlash and gives the coupling
linear torsional stiffness, thus the torsional rigidity remains con-
stant as the load on the coupling increases.
The ELPEX-B coupling is especially suitable for reversing oper-
ation or operation with changing directions of load.
The coupling parts can be arranged as required on the shaft
ends to be connected.
If the elastic tire is irreparably damaged or worn, the metal parts
can rotate freely against one another because they are not in
contact with one another.
■
Application
The ELPEX-B coupling is available as a catalog standard in 15
sizes with a rated torque of between 24 Nm and 14500 Nm. The
coupling can be fitted with elastic tires made of natural rubber
for ambient temperatures of -50 °C to +50 °C and with elastic
tires made of chloroprene rubber for -15 °C to +70 °C. The chlo-
roprene rubber tire is marked FRAS, "Fire-resistant and Anti-
static".
■
Design
The ELPEX-B coupling's transmission characteristic is deter-
mined essentially by the elastic tire. The elastic tire is manufac-
tured from a natural rubber or a chloroprene rubber mixture with
a multiply fabric insert. The elastic tire is fastened to the hubs
with bolts and two clamping rings.
In type EBWT, the shaft-hub connection is achieved with Taper
clamping bushes, in type EBWN with finish-drilled hubs and par-
allel keys. The type EBWZ connects the machine shafts addition-
ally via a detachable adapter.
Materials
Metal part materials
EN-GJL-250 grey cast iron or steel.
Elastic tire material
Material
Hardness
Identification
Ambient
temperature
Natural rubber
70 ShoreA
048
-50 °C ... +50 °C
Chloroprene rubber
70 ShoreA
068 FRAS
-15 °C ... +70 °C
© Siemens AG 2015