SIEMENS
4/10
Siemens D 31 · 2015
4
SINAMICS G120C compact inverters
0.55 kW to 18.5 kW (0.75 hp to 25 hp)
SINAMICS G120C compact inverters
■
Technical specifications
Unless explicitly specified otherwise, the following technical specifications
are valid for all SINAMICS G120C compact inverters.
1)
In transport packaging.
2)
For further general information,
see also chapter SINAMICS G120, section
Technical specifications, Compliance with standards
.
3)
Non-filtered devices are designed for operation on IT systems or in
conjunction with an RCD. The customer must provide suitable RI
suppression equipment to ensure that these devices comply with the limits
defined for Category C3 or C2.
4)
With shielded motor cable up to 25 m (82 ft).
5)
SINAMICS G120C compact inverters frame size FSB with PROFINET
interface (Article-No.: 6SL3210-1KE21-.AF1) additionally need a line
reactor.
Mechanical specifications
Vibratory load
• Transport acc. to EN 60721-3-2
1)
Class 1M2
• Operation acc. to EN 60721-3-3
Class 3M2
Shock load
• Transport acc. to EN 60721-3-2
1)
Class 1M2
• Operation acc. to EN 60721-3-3
Class 3M2
Degree of protection
IP20/ UL open type
Permissible mounting position
Vertical wall mounting
Ambient conditions
Protection class
according to EN 61800-5-1
Class III (PELV1)
Touch protection
according to EN 61800-5-1
Class I (with protective conductor system)
Humidity, max.
95 % at 40 °C (104 °F), condensation and icing not permissible
Ambient temperature
• Storage
1)
acc. to EN 60068-2-1
-40 ... +70 °C (-40 ... +158 °F)
• Transport
1)
acc. to EN 60068-2-1
-40 ... +70 °C (-40 ... +158 °F)
• Operation acc. to EN 60068-2-2
-10 ... +40 °C (14 ... 104 °F) without derating
>40 ... 60 °C (104 ... 140 °F)
see derating characteristics
Environmental class in operation
• Harmful chemical substances
Class 3C2 to EN 60721-3-3
• Organic/biological pollutants
Class 3B1 to EN 60721-3-3
• Degree of pollution
2 acc. to EN 61800
Standards
Compliance with standards
CE, cULus, C-Tick
Fail-safe certification
Function: Safe Torque Off (STO)
• According to IEC 61508
SIL 2
• According to EN ISO 13849-1
PL d and Category 3
CE marking, according to
EMC Directive 2004/108/EC
Low-Voltage Directive 2006/95/EC
EMC behavior
2)
According to EN 61800-3
Interference immunity
The SINAMICS G120C compact inverters are tested with the interference immunity requirements for environments
according to Category C3.
Interference emissions
• Frame sizes FSA to FSC
without integrated line filter
3)
• Frame sizes FSA to FSC
with integrated line filter class A
The inverters comply with the limits values according to Category C3.
The inverters comply with the limits values for conducted interferences and field-conducted radiated interferences
according to Category C2.
4) 5)
Note:
The EMC product standard EN 61800-3 does not apply directly to a frequency inverter but to a PDS
(Power Drive System), which comprises the complete circuitry, motor and cables in addition to the inverter.
The frequency inverters on their own do not generally require identification according to the EMC Directive.
© Siemens AG 2014