SIEMENS
9/8
Siemens MD 50.1 · 2015
Motor integrated frequency inverter SINAMICS G110M
0.37 kW to 4 kW
SINAMICS G110M distributed frequency inverters
9
■
Technical specifications
1)
In product packaging.
2)
Available only on request in combination with SIMOGEAR geared motors.
3)
For further information, see Catalog
D31 · 2015
.
4)
With shielded motor cable up to 5 m.
SINAMICS G110M
Mechanical specifications
Vibratory load
• Transport acc. to EN 60721-3-2
1)
Class 1M2
• Operation acc. to EN 60721-3-3
Class 3M3
Shock load
• Transport acc. to EN 60721-3-2
1)
Class 1M2
• Operation acc. to EN 60721-3-3
Class 3M3
Ambient conditions
Protection class acc. to EN 61800-5-1
Class III (PELV)
Touch protection acc. to EN 61800-5-1
Class I (with protective conductor system)
Permissible ambient and coolant temperature (air)
during operation for Power Modules
-10 ... +40 °C (14 ... 104 °F) without derating
> 40 ... 55 °C (104 ... 131 °F)
see derating characteristics
Permissible ambient and coolant temperature (air)
during operation for Control Units
-10 ... +55 °C (14 ... 131 °F) without derating
Humidity, max.
95 % at 40 °C (104 °F)
Ambient temperature
• Storage
1)
acc. to EN 60068-2-1
-40 ... +70 °C (-40 ... +158 °F)
• Transport
1)
acc. to EN 60068-2-1
-40 ... +70 °C (-40 ... +158 °F)
• Operation acc. to EN 60068-2-2
-10 ... +40 °C (14 ... 104 °F) without derating
Environmental class/harmful chemical substances
• Operation acc. to EN 60721-3-3
Class 3C2
Degree of pollution acc. to EN 61800-5-1
2
Certification for fail-safe versions
• According to IEC 61508
SIL 2
• According to ISO 13849-1
PL d and Category 3
Standards
Compliance with standards
CE
(UL 508C, UL list number E121068; C-Tick; cUL)
2)
CE marking, according to
Low-Voltage Directive 2006/95/EC
EMC Directive
3)
• Frame sizes FSA to FSB with integrated line filter class A
Category C2
4)
according to EN 61800-3 (corresponds to class A according
to EN 55011)
Note:
The EMC product standard EN 61800-3 does not apply directly to a frequency
inverter, but to a PDS (Power Drive System), which comprises the complete
circuitry, motor and cables in addition to the inverter. The frequency inverters
on their own do not generally require identification according to the
EMC Directive.
© Siemens AG 2015