SIEMENS
8/36
Siemens D 31 · 2015
8
■
Accessories
SINAMICS G120D distributed inverters
0.75 kW to 7.5 kW (1 hp to 10 hp)
Supplementary system components
Memory cards
SINAMICS memory card (SD card)
The parameter settings for an inverter can be stored on the
SINAMICS SD card. When service is required, e.g. after the in-
verter has been replaced and the data have been downloaded
from the memory card the drive system is immediately ready for
use again.
•
Parameter settings can be written from the memory card to the
inverter or saved from the inverter to the memory card.
•
Up to 100 parameter sets can be stored.
•
The memory card supports standard commissioning without
the use of the Intelligent Operator Panel IOP Handheld or the
STARTER and SINAMICS Startdrive commissioning tools.
•
If firmware is stored on the memory card, a firmware upgrade/
downgrade operation can be performed from the card during
power-up when a Control Unit is installed
1)
Note:
The memory card is not required for operation and does not
have to remain inserted.
1)
Additional information about upgrading/downgrading firmware can be
found on the Internet at
2)
The STARTER commissioning tool is also available on the internet at
Selection and ordering data
For more information about firmware V4.5:
For more information about firmware V4.6:
For more information about firmware V4.7:
PC inverter connection kit 2 (mini USB interface cable for
communication with a PC)
For controlling and commissioning an inverter directly from a
PC via a point-to-point connection if the appropriate software
(STARTER commissioning tool
2)
, V4.3 and higher, or
SINAMICS Startdrive) has been installed.
Selection and ordering data
STARTER commissioning tool
The STARTER commissioning tool (V4.3 and higher) supports
the commissioning and maintenance of SINAMICS G120D in-
verters. The operator guidance combined with comprehensive,
user-friendly functions for the relevant drive solution allow you to
commission the device quickly and easily.
Selection and ordering data
Description
Article No.
SINAMICS SD card
512 MB
6SL3054-4AG00-2AA0
Optional firmware memory cards
SINAMICS SD card
512 MB + firmware V4.5
(Multicard V4.5)
6SL3054-7EF00-2BA0
SINAMICS SD card
512 MB + firmware V4.6
(Multicard V4.6)
6SL3054-7EG00-2BA0
SINAMICS SD card
512 MB + firmware V4.7
(Multicard V4.7)
6SL3054-7EH00-2BA0
Description
Article No.
PC inverter connection kit -2
USB cable (3 m/9.84 ft long) for
• SINAMICS G120C
• SINAMICS G120 Control Units
• SINAMICS G110M Control Units
• SINAMICS G120D Control Units
- CU230P-2
- CU240B-2
- CU240E-2
- CU250S-2
• SINAMICS G110M Control Units
- CU240M
• SINAMICS G120D Control Units
- CU240D-2
- CU250D-2
6SL3255-0AA00-2CA0
Description
Article No.
STARTER commissioning tool
2)
On DVD-ROM
6SL3072-0AA00-0AG0
© Siemens AG 2014