REXNORD - MARBETT - MCC
Materials
Sprocket
Material
Sprockets and Idlers for Tabletop Chains
N/NS/NSH/SSW/SIW
Super tough reinforced polyamide, wear and abrasion resistant
KU(S)/KXT/NSX(T)/NX(T)/SD/SS/SI
Polyamide
ST
Carbon steel
Bolts
Stainless steel AISI 304 (1.4301)
Inserts
Brass
Sprockets and Idler
s for Multiflex Chains
KU/KUS/N/NX/NXT
Polyamide
ZN
Zinc plated steel
GG
Cast iron
Sprockets for Case Conveyor Chains
KU
Polyamide
SR
Super tough reinforced polyamide, wear and abrasion resistant
Hub
Carbon steel with b
Lack ²nish or stainLess steeL
Sprockets for Modular Belts
SSW 500/1000
NS 1500/5996/5700/7700/8500/7956
N 1500
SS 2500 RPA
Reinforced poLyamide; extra high strength, wear and abrasion resistant
CS 500/1000/505/1255
KU 1500/3125/5936/7700/8500/7956
KUS 1500/7700/3125
PoLyamide; super tough, wear and abrasion resistant
SS 1005/505/1255
SI 1005
SpeciaL pLastic; super tough, wear and abrasion resistant
KU 1010
CS 2010
KUS 6390
PoLyethyLene
N 5996/4700/5936
CS/SS 2000
KU 510
KUS/KSXT 9200
POM AcetaL; wear resistant
BoLts and nuts
StainLess steeL AISI 304 (1.4301)
Inserts
Brass
Part
Material
Curves
Combi-X Curves
Combi-X curves are made with a hybrid structure, using a stiff pLastic base part and inserts which are in contact with the
chains made of U±F (uLtra Low-friction) speciaL RAM extruded.
UHMWPE with soLid Lubricants. This structure resuLts in Lower friction and Longer guide wear Life meaning Less energy
consumption and Lower maintenance cost. The design is Patent Pending.
Upper part of Combi-A
and CIP-curves
MCC 1200, uLtra high moLecuLar weight poLyethyLene, for optimum wear and abrasion resistance with a high moLecuLar weight.
CoLour: aubergine
Upper part of Combi-G
curves
MCC 2000, uLtra high moLecuLar weight poLyethyLene, with speciaLLy integrated ceramic additives, for superior abrasion
resistance with a high moLecuLar weight. CoLour: green-yeLLow
Upper part of Combi-S
curves
MCC 3500, speciaL poLyamide for optimum wear resistance in dry running Lines where pLastic chains run at high speeds.
CoLour: suLphite grey
Upper part of Combi-± curves
MCC 3000, uLtra high moLecuLar weight poLyethyLene, for noise reduction and high PV Limits with a high moLecuLar weight.
CoLour: BLue
ALL return parts
MCC 1002, high grade mix of uLtra high moLecuLar weight poLyethyLene, for good wear and abrasion resistance with a high
moLecuLar weight. CoLour: bLack
Cover pLates
StainLess steeL AISI 430 (1.4016)
Screws
StainLess steeL
Inserts (optionaL)
Brass
Return guide shoe
MCC 1200, uLtra high moLecuLar weight poLyethyLene, for good wear and abrasion resistance with a high moLecuLar weight.
CoLour: bLack
Tubes in CIP-curves
StainLess steeL AISI 303 (1.4305)
NozzLes in CIP-curves
StainLess steeL AISI 303 (1.4305)
Tab curves
- inserts (optionaL)
MCC 1003, uLtra high moLecuLar weight poLyethyLene, for good wear and abrasion resistance.
211