REXNORD - MARBETT - MCC
Materials
Product
Material Belt
Plastic Modular Conveyor Belts
AS
Acetal with improved electrical conductive properties, reducing the build-up of static electricity. Colour: black
WHT*
Polypropylene for high temperature applications. Colour: white
BHT*
Polypropylene for high temperature applications. FDA-approved. Colour: blue
BLT*
Polyethylene for low temperature applications; high impact resistance. Colour: blue
SMB*
Acetal for high pressure and high speed, due to the hard surface; good abrasion resistance. Colour: blue
BSM
*
Acetal with high resistance against w
ear and super²ciaL damage. CoLour: bLack
BYSM
AcetaL with high resistance against wear and super²ciaL damage. CoLour: bLack with yeLLow end moduLes
HP
High Performance internaLLy Lubricated acetaL (POM), for reduced wear up to 40% over pLain acetaL; intended for dry running or
reduced Lubrication and high-speed appLications. CoLour: Braun
HT
PoLypropyLene for appLications with high temperatures; good chemicaL resistance. CoLour: beige
±F
±ow Friction acetaL (POM) and speciaL bLend of Lubricants for reduced wear up to 15% over pLain acetaL; intended for high-output
appLications at moderate to high speeds. CoLour: Light brown
Advanced performance poLymer aLLoy designed speci²caLLy for run dry appLications. CoLour: grey
TCF
Tough Composite Friction materiaL with high strength and exceLLent impact and chemicaL resistance for high-speed case incLine or
decLine conveyors. CoLour: Light grey
USP
ULtra StabiLized PoLypropyLene to increase reLiabiLity and proLong wear Life in high temperature, chemicaLLy-aggressive pasteurizer,
warmer and cooLer appLications. CoLour: green
W±T
*
PoLyethyLene for Low temperature appLications; high impact resistance. CoLour: white
WSM
AcetaL for high pressure and high speed, due to the hard surface; good abrasion resistance. CoLour white
BWX
PoLyamide composite for extended wear Life up to ²ve times compared to acetaL materiaLs; to be used in dry running gLass handLing
appLications where abrasive shards of gLass can wear other materiaLs rapidLy; it can aLso be used in appLications where the beLt is
subjected to sand and dirt. CoLour: BLack
DKA
Aramide reinforced acetaL (POM) for wet or dry abrasive conditions, offering enhanced wear properties over pLain acetaLs in combi-
nation with the Low friction of a Lubricated materiaL. This materiaL is avaiLabLe on request for a seLected range of TabLeTop products.
X±A
InternaLLy Lubricated, extra Low friction acetaL for improved wearLife and high strength. CoLour: anthracite
X±G
InternaLLy Lubricated, extra Low friction acetaL for improved wearLife and high strength; FDA approved. CoLour: green-bLue
XP
Wear resistant poLypropyLene with exceLLent Long term heat stabiLity – up to 104°C – and a very good chemicaL resistance; FDA
approved. CoLour: Light green
MR
MeLt resistant nyLon PA. FormuLated to be used in appLications where conveying hot products may cause chain top surface to meLt.
CoLour: bLack
CRS
PoLyester formuLated to reduce or eLiminate materiaL degradation in appLication where chemicaLs such as chLorine and phosphorous
are present at moderate concentrations. CoLour: grey
DTS-C
transfer
Super tough reinforced poLyamide, wear and abrasion resistant, extra high strength. CoLour: bLack
Finger transfer 2500
Mounting bLock: MCC 1001; high grade mix of UHMWPE. CoLour: bLack Fingers: Reinforced BPR-PoLypropyLene. CoLour: green-bLue
Pro²Le ²ngerpLates 1000/2000
StainLess steeL AISI 304 (1.4301)
Wearstrip MCC 3500
SpeciaL Lubricated poLyamide for superior PV-rating. CoLour: grey-bLack
Wearstrip MCC 3600
PoLyester based pLastic for direct food contact; FDA-approved. CoLour: white
Multiflex and Case Conveyor Chain
HP
High Performance internaLLy Lubricated acetaL (POM) for reduced wear up to 40% over pLain acetaL.
CoLour: brown
StainLess steeL
±F
±ow Friction acetaL (POM) and speciaL bLend of Lubricants for reduced wear up to 15% over pLain acetaL.
CoLour: Light brown
StainLess steeL
1700 K:
zinc pLated stainLess
steeL
WX
PoLyamide composite for extended wear Life in abrasive circumstances up to ²ve times compared to pLain
acetaL. CoLour: Light green
StainLess steeL
W±F
±ow Friction acetaL (POM) and speciaL bLend of Lubricants for reduced wear up to 15% over pLain acetaL.
CoLour: white
StainLess steeL
1700 K: zinc pLated
stainLess steeL
AC
Armor CLad acetaL with hardened steeL top pLates
Zinc pLated
BWX
PoLyamide composite for extended wear Life in abrasive circumstances up to ²ve times compared to pLain
acetaL. CoLour: bLack.
StainLess steeL
1700 K: zinc pLated
stainLess steeL
Corner disc
Hub
Reinforced PoLyamide
HP ±ow Friction acetaL (ND 1700 F±/TR): brass (880)
X±
InternaLLy Lubricated, extra ±ow Friction acetaL for improved wearLife and high strength. CoLour: Light brown
AISI 431 (1.4057)
NC
Wear resistant, speciaL acetaL. CoLour: white
AISI 301 (1.4310)
B±
AcetaL. CoLour: bLue, RA± 5005
AISI 301 (1.4310)
WPP
ChemicaL resistant and high temperature water resistant poLypropyLene with gLass ²bers. CoLour: white
210
* CompLy with the reLevant requirements as Laid down in: Framework ReguLation (EC) 1935/2004 (dated 27-10-2004). EU Commission ReguLation (EU) 10/2011
reLating to pLastic materiaLs (tested according to EC Directive 97/48/EC; Migration testing (2nd amendment of 82/711/EEC) and EC Directive 85/572/EC; ±ist of
simuLants).