REXNORD - MARBETT - MCC
2010-Series
Assembly
Belt Type
Code Number*
Temperature range
°
C
Working
Load
(max.)
Weight
Bac
kflex
Radius (min.)
Dry
Wet
N/m (21°C)
kg/m
2
mm
Polyethylene with Polyethylene Pins
Mould To Order
WLT 2011
846.07.51
-70 to +35
-70 to +35
7500
9.50
87
Mould To Order
BLT 2011
846.09.51
-70 to +35
-70 to +35
7500
9.50
87
Polypropylene with Polypropylene Pins
Mould to order
WHT 2011
849.06.51
4 to 104
4 to 104
15000
8.90
87
Mould to order
BHT 2011
849.02.60
4 to 104
4 to 104
15000
8.90
87
Acetal with Polypropylene Pins
Mould to order
WSM 2011
844.04.51
4 to 80
4 to 65
20000
13.60
87
Mould to order
SMB 2011
844.05.00
4 to 80
4 to 65
20000
13.60
87
Material
WLT, BLT, WHT, BHT,
WSM
or
SMB
Belt type
2011, 2015
or
2016
Width (A)
K..
(in inches)
BeLts with lights have a minimaL width of 8”; smaLLer upon request
FLights
F1 or F2 or F3 or F4 or H..
F5 or F6
C4 or C6
DRF2 or DRF3 or DRF4 or RH..
DRC4 or DRC6
B4 or B6
Straight; standard height 1” to 4” or special in mm; all materials available
Straight; standard height 5” or 6”
Curved; height 4” or 6”
Ribbed straight; height 2”, 3” or 4” or special in mm
Ribbed curved; height 4” or 6” or special in mm
Bucket flight; height 4” or 6”
Pitch between lights
T..P
FLights on every ..
th
row
FLight side-indent
N..
(in inches)
MinimaL 1
1
⁄
3
” with
2
⁄
3
” increments; sideguards are situated at
1
⁄
3
” from the light, reducing the
indent by
2
⁄
3
”; if side-indent is 1
1
⁄
3
”, sideguards are directLy besides the light, reducing the
indent by
1
⁄
3
”
Sideguards
SG2
or
SG3
or
SG4
Standard height of 2”, 3” or 4”
Integrated SideraiL
ISR4
or
ISR6
Standard height of 4” or 6” Other sizes up on request. Side Indent in combination with ISR is
aLways 2
2
/
3
“ to the light. FLights are positioned directLy against the Integrated SideraiL (ISR).
Pag. 186
Textured Top 2011
*
FLight materiaLs can differ from the beLt materiaL in some light / beLt combinations. F5 and F6 are heavy duty lights. Ribbed lights can be doubLe
ribbed (both sides) or singLe rib depending on materiaL and execution.
ExampLe: B±T 2016 K10 SG4 is a 2016 Perforated Top beLt, made of bLue poLyethyLene, width 10”, no lights and 4” high sideguards.
ExampLe: BHT2015 K24 C6 T4P ISR6, is a SoLidTop beLt, made of bLue PoLyporyLene, width 24”, with 6” high curved pushers every 6th row and 6” high
Integrated SideraiL (and therefore a side indent of 2
2
/
3
” )
*
Code numbers in the tabLe correspond with 6” wide beLts. Code numbers go up with 1 (e.g. 846.07.52, 846.07.53 etc.) for each standard
2” increment (8”, 10” etc.) up to 120”. OptionaLLy
2
⁄
3
” increments possibLe. See aLso page 208.
If you require lights or sideguards, pLease describe the beLt by choosing from the options Listed in the 2
nd
coLumn of the tabLe:
185