SIEMENS
7/8
Siemens MD 50.8 · 2017
General options
Documentation
7
■
Safety instruction sheet and operating instructions
The geared motors are shipped with a multi-language safety
instruction sheet for each delivery batch.
Geared motors with the G110M motor integrated frequency
inverter are shipped with the safety instruction sheet and the
documentation for the G110M for each delivery batch.
Geared motors with a functionally safe rotary encoder are
shipped with the safety instruction sheet and one set of
operating instructions in German or English for each delivery
batch.
One set of operating instructions is enclosed for each geared
motor using the following ordering option.
The operating instructions include the following documents:
•
Replacement part drawings and lists
•
Declaration of incorporation of partly completed machinery
according to the EC Machinery Directive 2006/42/EC
(gearboxes)
•
EC Declaration of Conformity according to Directive
2006/95/EC (motors)
The latest versions of the operating instructions, the declaration
of incorporation and the declarations of conformity are available
in the Industry Online Support:
■
Test certificates
On request, the following documents are available by email:
Enclosed
documentation
Language
Order code
1 set of operating instruc-
tions for each geared motor
German
W21
English
W22
Additional documentation
The following is checked:
Order code
Declaration of compliance with the order EN 0204-2.1 and
factory test report EN 10204-2.2, geared motor
-
On request
Factory test report EN 10204-2.2 for material
-
On request
Acceptance test certificate EN 10204-3.1 for the motor
• 3 no-load currents of the 3 phases
• Power loss for no-load operation
• No-load speed
W10
Acceptance test certificate EN 10204-3.1 for gearboxes
• Output shaft diameter
• Concentricity of the output shaft
• Concentricity of the input shaft
(for gearboxes with input unit A only)
• Input shaft diameter (for gearboxes with
input unit A only)
• Noise
(subjective assessment)
W11
Acceptance test certificate EN 10204-3.1 for paint finish
-
W12
© Siemens AG 2017