ABB
6
ABB/ BU Machines / HV Induction motors IEC catalogue / Standard motors EN 12-2007
1
Closed
Open
The motor frames including feet and bearing housing
are made of cast iron. Terminal box is made of
structural steel. Integrally cast feet allow a very rigid
mounting and minimal vibration.
All the high voltage motors are fitted with drain holes
and closable plugs. The drain hole plugs are open on
delivery and users must ensure that the drain holes
face downward when mounting the motors.
Drain holes
Motors can be supplied for foot mounting (horizontal),
foot and flange mounting (horizontal) or flange
mounting (vertical).
Motor sizes 315-450
As standard with drain holes and closable plugs.
Mechanical design
For applications with a vertical mounting, the upper
plug must be hammered home completely. In very
dusty environments, both plugs should be hammered
home.
This is a standard motor catalogue with limited
optional features and accessories. In case you need an
engineered cast iron motor, please contact your local
ABB Sales office for further information.
Stator frame
M000241