ABB
ABB/ BU Machines / HV Induction motors IEC catalogue / Engineered motors EN 12-2007
51
2
General Information
ABB's engineered motors are tailor-made to meet its
customers' needs. All ABB engineered motors are
configured and optimized individually for each order and
application. Please contact ABB for further information.
This catalogue contains information on ABB’s standard
construction squirrel-cage induction motors operating at
50 Hz and with synchronous speed from 500 to
3000 rpm. The output range is up to 2800 kW.
This catalogue describes two different motor types,
the AMA range and the HXR range.
Both motor types
can be operated with variable speed drives or used
as induction generators and motors can be mounted
horizontally or vertically. Either motor can be used for
both standard and special applications.
The AMA range features a welded steel frame and is
available as standard with the following cooling methods
and protection types: IC 01 / IP 24W, IC 611 / IP 55 and
IC 81W / IP 55. The standard shaft heights are between
400 and 500 mm.
The HXR range features a rugged cast iron frame and
is totally enclosed fan cooled motor of IC 411 / IP 55.
HXR motors have standard shaft heights between 355
and 560 mm.
The table below shows the available output power,
voltage range and pole numbers.
Output (kW) at 50 Hz
Output (kW) at 50 Hz
HXR
AMA
Poles
3 kV
6 kV
10 kV
3 kV
6 kV
10 kV
2
100 - 1730
160 - 1600
400 - 1250
630 - 2500
630 - 2500
560 - 1800
4
400 - 2240
100 - 2000
355 - 1400
630 - 2800
630 - 2800
630 - 2240
6
100 - 2000
100 - 1800
315 - 1400
450 - 2250
450 - 2250
450 - 1600
8
200 - 1800
180 - 1600
315 - 1120
280 - 1600
280 - 1600
630 - 1250
10
224 - 1400
224 - 1250
560 - 710
200 - 1120
200 - 1120
450 - 1000
12
450 - 1120
400 - 1000
-
140 - 900
140 - 900
315 - 710
Output ranges of ABB motors (Temperature rise class B, insulation class F). Other voltages on request.
Mounting arrangement
Standard mounting arrangements for AMA motors. Other mountings on request.
Code I: IM B3
Code II: IM 1001
Horizontal foot mounted
Code I: IM V1
Code II: IM 4011
Vertical flange mounted
(free shaft end facing downwards)