SIEMENS
7/4
Siemens D 31 · 2015
7
SINAMICS G110D distributed inverters
0.75 kW to 7.5 kW (1 hp to 10 hp)
SINAMICS G110D distributed inverters
■
Selection and ordering data
■
Benefits
•
Wide power range from 0.75 kW to 7.5 kW
•
Fast commissioning and maintenance as well as extended
diagnostic functions and communications capability with
AS-Interface according to specification 3.0:
- Reduced number of interfaces
- Plant-wide engineering
- Easy to handle
•
Mechanical design, installation and retrofit of systems are
significantly simplified as a result of the compact and space-
saving design with an extremely low profile and with the same
drilling dimensions for all power ratings; further, the dimen-
sions are identical with those of the SINAMICS G120D
inverter.
•
Easy commissioning and maintenance as a result of the same,
standardized connectors for the bus, power and I/O connec-
tions (ISO 23570) for the complete range of power ratings of
SINAMICS G110D and SINAMICS G120D.
•
The same connectors are used as for the SIRIUS M200D
motor starter
•
Simple, standard implementation of completely distributed
plant and system concepts by using products in a scalable
fashion:
- SIRIUS M200D (motor starter)
- SINAMICS G110D (inverter for basic conveyor-related
applications)
- SINAMICS G110M (inverter for conveyor-related
applications)
- SIMATIC ET 200pro FC-2 (inverter for distributed IOs,
available soon)
-
SINAMICS G120D (inverter for demanding conveyor-related
applications)
•
High degree of operator friendliness by using the Intelligent
Operator Panel (IOP) to parameterize, diagnose, control
(open-loop) and copy drive parameters in the BOP
•
Easy to replace thanks to a plug-in design and the use of a
memory card, providing the highest degree of service
friendliness
•
Simple connection, engineering, data management as well as
control of the inverter in sophisticated plants and systems as
a result of the consequential integration in TIA (Totally
Integrated Automation)
•
Using the optional maintenance switch, the inverter can be
simply disconnected from the line supply when service is
required, without any additional components or without
additional wiring costs when configuring the system
•
Using the optional manual local control, commissioning is fast
and can be limited to specific areas, the application can be
manually pre-tested on site and the system can be cleared or
emptied without requiring comprehensive options.
•
By being able to connect up to 5 sensors directly at the unit,
practically all of the drive-relevant information can be directly
managed; local pre-processing of the signals takes the load
off the fieldbus and ensures a
fast and reproducible response
time
•
Integrated EMC filter class A (acc. to EN 55011)
•
Integrated brake control, brake voltages supported: 180
V DC
and 205 V DC
•
Integrated motor protection using a thermal motor model and
evaluation of PTC, KTY or bimetal temperature sensors
•
Easy replacement of devices and fast copying of parameters
to the memory card using the optional memory card holder
and the optional memory card
•
Engineering and commissioning with standard engineering
tools such as SIZER for Siemens Drives (V3.2 and higher),
STARTER (V4.1.3 and higher) and Drive ES ensure fast
engineering and simple commissioning - STARTER is
integrated into STEP 7 with Drive ES Basic, with all the
advantages of central data storage and totally integrated
communication
•
Software parameters for simple adaptation to 50 Hz or 60 Hz
motors (IEC or NEMA motors)
•
Increased degree of ruggedness and longer service life as the
electronic modules are coated
•
Globally certified acc. to CE, UL, C-Tick
1)
Rated power based on the rated output current
I
rated
. The rated output
current
I
rated
is based on the duty cycle for high overload (HO).
2)
The rated output current
I
rated
is based on the duty cycle for high over-
load (HO). These current values apply at 400 V and are specified on
the rating plate.
3)
With the exception of UL operation, 500 V +10 % is possible.
4)
It is not possible to make any assignment to a particular standard.
Rated power
1)
Rated output
current
2)
Input current
Frame size
SINAMICS G110D
with integrated line filter
class A
SINAMICS G110D
with integrated line filter
class A and integrated
maintenance switch
kW
hp
A
A
Article No.
Article No.
380 … 500 V 3 AC
3)
0.75
1
2.3
2
FSA
6SL3511-0PE17-5AM0
6SL3511-1PE17-5AM0
1.5
1.5
4)
4.3
3.8
FSA
6SL3511-0PE21-5AM0
6SL3511-1PE21-5AM0
3
4
7.7
7
FSA
6SL3511-0PE23-0AM0
6SL3511-1PE23-0AM0
4
5
10.2
9.1
FSB
6SL3511-0PE24-0AM0
6SL3511-1PE24-0AM0
5.5
7.5
13.2
12.2
FSC
6SL3511-0PE25-5AM0
6SL3511-1PE25-5AM0
7.5
10
19
17.9
FSC
6SL3511-0PE27-5AM0
6SL3511-1PE27-5AM0
© Siemens AG 2014