SIEMENS
6/30
Siemens D 31 · 2015
6
■
Accessories
SINAMICS G110M distributed inverters
0.37 kW to 4 kW (0.5 hp to 5 hp)
Supplementary system components
Memory card
SINAMICS memory card (SD card)
The parameter settings for an inverter can be stored on the
SINAMICS SD memory card. When service is required, e.g. after
the inverter has been replaced and the data have been down-
loaded from the memory card the drive system is immediately
ready for use again.
•
Parameter settings can be written from the memory card to the
inverter or saved from the inverter to the memory card.
•
Up to 100 parameter sets can be stored.
•
The memory card supports standard commissioning without
the use of the Intelligent Operator Panel IOP Handheld or the
STARTER and SINAMICS Startdrive commissioning tools.
Note:
The memory card is not required for operation and does not
have to remain inserted.
Selection and ordering data
PC inverter connection kit 2 (mini USB interface cable for
communication with a PC)
For controlling and commissioning an inverter directly from a
PC via a point-to-point connection if the appropriate software
(STARTER commissioning tool
1)
, V4.3 SP3 and higher or
SINAMICS Startdrive V13 and higher) has been installed.
Selection and ordering data
Installation kits
Different installation kits can be ordered as accessories for the
Control Units with plug-in connections and Control Units with
cable gland connections.
These kits include covers or cable glands for protecting or
connecting the 400 V 3 AC supply, the 24 V DC supply and the
mechanical motor brake.
Selection and ordering data
STARTER commissioning tool
The STARTER commissioning tool (V4.3 SP3 and higher) sup-
ports the commissioning and maintenance of SINAMICS
G110M
inverters. The operator guidance combined with comprehen-
sive, user-friendly functions for the relevant drive solution allow
you to commission the device quickly and easily.
Selection and ordering data
SINAMICS Startdrive commissioning tool
The SINAMICS Startdrive commissioning tool (V13 and higher)
supports the commissioning and maintenance of
SINAMICS G110M inverters. SINAMICS Startdrive is part of the
TIA Portal engineering platform. It supports the intuitive integra-
tion of SINAMICS drives in automation. The same operator con-
trol concept, the elimination of interfaces and a high degree of
user-friendliness make it possible to quickly integrate SINAMICS
into an automation process and start it up with the TIA Portal. The
TIA Portal with SINAMICS Startdrive offers you a totally inte-
grated engineering platform for the complete application from
the project engineering phase through to commissioning and
diagnostics.
Selection and ordering data
1)
STARTER commissioning tool is also available on the Internet at
2)
The SINAMICS Startdrive commissioning tool is also available on the
Internet at
Description
Article No.
SINAMICS memory card (SD card)
512 MB
6SL3054-4AG00-2AA0
Description
Article No.
PC inverter connection kit 2
USB cable (length 3 m (9.84 ft)) for
• SINAMICS G120C
• SINAMICS G120 Control Units
• SINAMICS G110M Control Units
• SINAMICS G120D Control Units
- CU230P-2
- CU240B-2
- CU240E-2
- CU250S-2
• SINAMICS G110M Control Units
- CU240M
• SINAMICS G120D Control Units
- CU240D-2
- CU250D-2
6SL3255-0AA00-2CA0
Description
Article No.
Installation kit for Control Units
with cable gland connections
Includes cable glands for connect-
ing the 400 V 3 AC supply, the
24 V DC supply and the mechanical
motor brake
6SL3566-2VA00-0GA0
Installation kit for Control Units
with plug-in connections
Includes covers for protecting the
400 V 3 AC and 24 V DC input
connectors and a cable gland for
connecting the mechanical motor
holding brake
6SL3566-2LA00-0GA0
Description
Article No.
STARTER commissioning tool
1)
on DVD-ROM
6SL3072-0AA00-0AG0
Description
Article No.
SINAMICS Startdrive
commissioning tool
2)
on DVD-ROM
6SL3072-4DA02-0XG0
© Siemens AG 2014