SIEMENS
3/48
Siemens ST PCS 7 · 2017 (Preliminary edition)
3
Industrial Workstation/IPC
SIMATIC Microbox PC
OS Client 477D
■
Overview
SIMATIC PCS 7 OS client 477E, from above and from the front
The SIMATIC PCS 7 OS client 477E consists of a 22" TFT Touch
Panel with integrated computing unit. It is available in two ver-
sions.
•
SIMATIC PCS 7 OS client 477E (HDD)
with a hard disk, 2.5" SATA HDD, 320 GB
•
SIMATIC PCS 7 OS client 477E (SSD)
with a solid state drive, 2.5" SATA SSD, 240 GB
■
Design
The design of the SIMATIC PCS 7 OS client 477E has been opti-
mized for installation in the mounting cutouts of cabinets, enclo-
sures and consoles.
Both versions of the SIMATIC PCS 7 OS client 477E are suitable
for maintenance-free 24/7 operation without the support of a fan.
The more rugged SIMATIC PCS 7 OS client 477E with SSD can
bear greater mechanical loads. With vertical installation in land-
scape format, the SIMATIC PCS 7 OS Client 477D is approved
for operating temperatures of 0 to +45 °C.
Using a touch pen as an input aid protects the touch screen and
makes it easy to achieve pin-point accuracy when operating
small input boxes or buttons – especially when working with
gloves.
IPC477E, 22-inch, for SIMATIC PCS 7, with connections
Expansions/interfaces
The SIMATIC PCS 7 OS client 477E (HDD/SSD) has:
•
4 high-speed USB 3.0 ports at the back
•
1 USB port on the front
•
2 DisplayPort interfaces
•
3 Gigabit Ethernet ports (IE/PN)
The integrated Ethernet ports are suitable for connection to a
redundant terminal bus (for details on implementation, refer to
the function manual "High-availability process control systems",
"Redundant, high availability terminal bus").
The SIMATIC PCS 7 OS client 477E (HDD/SSD) is supplied
without input/output devices. In addition to mouse and key-
board, two other input/output devices can be externally con-
nected via the provided USB ports, e.g. an optical drive
(DVD-ROM/DVD±RW) or smart card reader.
Monitoring functions
Configurable monitoring functions can be recorded and
evaluated via SIMATIC IPC DiagMonitor and SIMATIC PCS 7
Maintenance Station. These monitoring functions include:
•
Program execution (watchdog)
•
Processor and board temperatures
•
Enhanced diagnostics/messages, e.g. operating hours
counter, hard disk status or system status, backup battery
status
Pre-installed software
The following software is pre-installed on the SIMATIC PCS 7
OS client 477E (HDD/SSD) on delivery:
•
Windows 10 Enterprise 2015 LTSB, 64-bit operating system
•
SIMATIC PCS 7 OS software client
•
SIMATIC IPC DiagMonitor diagnostics software
On/off
switch
Power supply
24 V DC
G_PCS7_XX_00633
4 × USB 3.0
3 × Ethernet
2 × DisplayPort
© Siemens AG 2017