SIEMENS
8/4
Siemens ST PCS 7 · 2017 (Preliminary edition)
8
Automation Systems
Modular AS 410-5H and AS 410E systems
■
Overview
With the rugged all-round AS 410 system, the SIMATIC PCS 7
process control system offers an exclusive automation system
from the SIMATIC S7-400 series, which can be used in all do-
mains due to its versatility.
The rugged AS 410 is a modern, future-oriented, all-round sys-
tem for the process industry. Its versatility means it can be used
in all areas – as a standard AS 410S system, as a high-availabil-
ity AS 410H or as safety-related AS 410F/FH. More and more
innovative functions are being exclusively combined with this
automation system, for example redundant PROFINET configu-
rations and configuration changes during operation for
PROFINET in singular and redundant applications
With its high-performance hardware and optimized firmware,
the innovative
CPU 410-5H Process Automation
of the AS 410
covers the entire performance range of conventional AS 412 to
AS 417 automation systems. Its automation performance can be
scaled with system expansion cards based on the number of
SIMATIC PCS 7 process objects (POs) as follows:
• 100 POs
• 500 POs
• 1 000 POs
• 1 600 POs
•
≥
2 000 POs (PO 2k+)
The type reduction to a single CPU offers numerous advantages.
It significantly simplifies selection and configuration of the auto-
mation system as well as spare part inventory and plant expan-
sion.
The AS 410E automation system with
CPU 410E Process
Automation
is a cost-saving alternative for small applications.
Based on CPU 410-5H hardware, it offers the same benefits for
applications with up to 200 PO.
■
Design
Similar to all SIMATIC PCS 7 automation systems of the S7-400
series, AS 410 automation systems are available as "AS bun-
dles" as follows:
•
Individual components bundled per system in one delivery
•
Pre-assembled and tested complete systems (no extra
charge compared to delivery of individual components)
The AS bundles come furnished with the SIMATIC PCS 7 Run-
time license for 100 process objects (PO). Building on this, the
number of process objects can be increased with cumulative
AS Runtime licenses for 100, 1 000 or 10 000 POs.
The configuration of the AS bundles as well as the Article No.'s
can be defined by selecting pre-configured ordering units. Sys-
tem-specific ordering configurations are available in tabular
form for this purpose in the sections "Standard automation sys-
tems", "Fault-tolerant automation systems" and "Safety-related
automation systems".
For interactive configuration of AS bundles, there are also two
online configurators available in the Industry Mall:
•
SIMATIC PCS 7 AS 410 Single Station configurator
•
SIMATIC PCS 7 AS 410 Redundancy Station configurator
CPU, aluminum rack (except UR1), optionally redundant or re-
dundant power supply modules (in 4 A and 10 A versions), com-
munication modules and sync modules of the SIMATIC PCS 7
AS 410 bundles have an additional coating (conformal coating).
AS 410 bundles for operating temperatures up to 70 °C
The AS 410 bundles are usually designed for operating tem-
peratures up to 60 °C. Additional designs are available for
extreme conditions; these are permitted for operating
temperatures up to 70 °C. Their components mainly carry the
designation "XTR" (extended temperature range) in their names.
All components of the "AS 410 bundles for the extended tem-
perature range (XTR)" also have an additional coating (confor-
mal coating).
The Article No.'s of the AS 410 bundles for the extended tem-
perature range (XTR) can be defined in the sections "Standard
automation systems", "High availability automation systems" and
"Safety-related automation systems" by means of an individual
configuration table.
© Siemens AG 2017