ITALVIBRAS
56
H
B
N
M3
-
E
6E0467
M3/65-E-S02
00
6.43
6.43
64.7
93.1 0.635 0.913
4.3
4.3
T4
120°C
105
105
80
80
0.30
0.29
20
6E0465
M3/105-E-S02
00
9.64
9.64
97.0
140
0.950 1.37
5.2
5.2
6E0462
M3/205-E-S02
00
21.0
21.0
211
304
2.07
2.98
6.0
6.0
6E0461
M3/305-E-S02
00
31.0
21.0
311
304
3.05
2.98
6.3
6.0
The M3-E is designed for use in industrial processes in envi-
ronments with a potentially explosive atmosphere, caused
by gas and dust, in compliance with ATEX Directive (94/9/
EC).
In particular, the M3-E can be used in areas 1 and 2 (gas)
and in areas 21 and 22 (dusts) according to the layout and
the following features:
Technical features
Power supply
Three-phase voltage 127/220V 50Hz,
200/346V 50Hz, or 210/363V 60 Hz; suita-
ble for use with an inverter from 20Hz to
the base frequency with constant torque
load profile.
Polarity
2 poles.
Conformity with European Directives
Low Voltage 2006/95/EC, ATEX 94/9/EC.
Reference Regulations
IEC/EN 60079-0, IEC/EN 60079-7,
IEC/EN 60079-31, EN 60034-1.
Controls
The components that affect protection are
100% accurately controlled and recorded.
Functioning
Continual service (S1) at maximum decla-
red centrifugal force and electric power.
Intermittent services are also possible
depending on the type of vibrator and the
operating conditions. For detailed infor-
mation contact our technical assistance
office.
Centrifugal force
Range up to 311 kgf (3.05 kN). Centrifugal
force can be changed by adjusting the
eccenctric weights.
Mechanical protection
IP 66 according to IEC 529, EN 60529.
Protection against mechanical impacts
IK 08 according to IEC 68, EN 50102.
Insulation class
Class F (155°C).
Tropicalization
Standard with vacuum encapsulation.
Ambient temperature
From -20°C to +40°C, on request it is pos-
sible to have vibrators for max. ambient
temperatures of +55°C.
Vibrator thermal protectIon
On request with PTC thermistor rated heat
detectors 130°C (DIN 44081-44082).
Fixing of the vibrator
In all positions and therefore without
restriction. The terminal box is positioned
underneath the vibrator, on the same side
as the fixing base.
Lubrication
Sealed ball bearing, lubricated “for life”.
Terminal box
The terminal box is positioned under-
neath the vibrator, on the same side as
the fixing base. Special shaped terminals
allow to fix the power supply cable, pro-
tecting it from loosening.
Electric motor
Three-phase asynchronous type. Insulated
windings using vacuum encapsulating.
The rotor is die cast aluminium.
2 poles - 3000/3600 rpm
Mechanical specifications
Static
moment*
kgmm
Centrifugal force
Weight
kg
kg
kN
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
50 Hz
60 Hz
400 V
50 Hz
460 V
60 Hz
Electrical specifications
* Working moment = 2 x static moment.
t
E
(s) = set time t
E
from IEC/EN 60079-7.
three-phase
Description
Code
Type
SIZE
Temp.
class
(G)
Temp.
class
(D)
Max input
power
W
Power
rating
W
Max. current
A
t
E
(s)
50 Hz
60 Hz
50 Hz
60 Hz