SIEMENS
7/20
Siemens D 31 · 2015
7
■
Accessories
SINAMICS G110D distributed inverters
0.75 kW to 7.5 kW (1 hp to 10 hp)
Supplementary system components
Motor cables pre-assembled at one end and connector sets to connect the inverter to the motor
Selection and ordering data
Power bus distribution 400 V in IP65 degree of protection
Selection and ordering data
Additional information
An overview of further accessories (e.g. connectors and cables)
can be found under the following link:
/distributeddrives-supplementaryproducts
For further information about the connecting cables and plug-in
connectors mentioned above, please refer to Catalog IK PI.
Further selected accessories are available from Siemens
Solution Partners. Please go to the "Solution Partner Finder" and
select technology "Distributed Field Installation System".
/automation/partnerfinder
Motor cables pre-assembled
at one end
For motors with brake
and temperature sensor
with HAN Q8 connector, shielded
Article No.
(HTG: supplied by Harting)
(ZKT: supplied by KnorrTec)
Cross-section
4 × 1.5 mm
2
2 × (2 × 0.75 mm
2
)
4 × 2.5 mm
2
2 × (2 × 0.75 mm
2
)
4 × 4 mm
2
2 × 1 mm
2
+ 2 × 1.5 mm
2
• 1.5 m (4.92 ft) long
HTG: 61 88 201 0288
HTG: 61 88 201 0291
HTG: 61 88 201 0303
ZKT: 70020501000150
ZKT: 70009601000150
ZKT: 70017001000150
• 3 m (9.84 ft) long
HTG: 61 88 201 0289
HTG: 61 88 201 0292
HTG: 61 88 201 0304
ZKT: 70020501000300
ZKT: 70009601000300
ZKT: 70017001000300
• 5 m (16.41 ft) long
HTG: 61 88 201 0290
HTG: 61 88 201 0293
HTG: 61 88 201 0305
ZKT: 70020501000500
ZKT: 70009601000500
ZKT: 70017001000500
• 10 m (32.81 ft) long
HTG: 61 88 201 0299
HTG: 61 88 201 0301
HTG: 61 88 201 0306
ZKT: 70020501001000
ZKT: 70009601001000
ZKT: 70017001001000
Connector set
for motor cable
HAN Q8, shielded
HTG: 61 83 401 0131
HTG: 61 83 401 0132
HTG: 61 83 401 0133
ZKT: 10032001
ZKT: 10032011
ZKT: 10032021
Description
Ordering
(see Solution Partner)
Power T clamp connector for
2.5 ... 6 mm
2
With attached 7-pole connector,
socket insert, grommet housing, UL
Seals for various cable cross-sections
must be ordered separately
Ordered from and supplied
by Harting
T clamp connector
Completely pre-assembled
Ordered from and supplied
by KnorrTec
T distributor box, IDC connection
power cable
Pre-assembled, UL, uncut power cable,
2.5 ... 6 mm
2
Push-in connection: 1.5 ... 6 mm
2
Seals for various cable cross-sections
must be ordered separately
Ordered from and supplied
by Weidmüller
Y distributor
For direct connection of 400 V supply line,
HAN Q4/2, conductor cross-section
1.5 ... 4 mm
2
Ordered from and supplied
by Harting
© Siemens AG 2014