SIEMENS
7/9
Siemens D 31 · 2015
7
■
Technical specifications
SINAMICS G110D distributed inverters
0.75 kW to 7.5 kW (1 hp to 10 hp)
SINAMICS G110D distributed inverters
1)
With voltage boost activated.
2)
Applies to industrial control panel installations to NEC article 409 or
UL 508A.
General technical specifications, power electronics
System operating voltage
380 ... 500 V AC 3 AC ±10 %
Grid requirement, short-circuit
power R
SC
No restriction
Input frequency
47 ... 63 Hz
Output frequency
• Control mode V/f
0 ... 650 Hz (a 550 Hz limit is in preparation in order to satisfy legal requirements)
Pulse frequency
4 kHz (standard), for higher pulse frequencies up to 16 kHz,
see derating data
Power factor
λ
0.7 ... 0.85
Inverter efficiency
η
95 %
Output voltage, max.
as % of input voltage
0 ... 87 %
Overload capability
• High overload (HO)
• Average maximum rated output current during a cycle time of 300 s
• 1.5 × rated output current (i.e. 150 % overload) over 60 s at a cycle time of 300 s
• 2 × rated output current (i.e. 200 % overload) over 3 s at a cycle time of 300 s
Electromagnetic compatibility
Integrated class A line filter according to EN 55011
Possible braking methods
DC braking
Integrated brake control supplies DC power supply for the brake
Line voltage
380 V AC
400 V AC
440 V AC
480 V AC
500 V AC
Rectified brake
voltage
171 V DC
180 V DC
198 V DC
216 V DC
225 V DC
Recommended
brake coil voltage
for Siemens
motors
170 ... 200 V DC
170 ... 200 V DC
184 ... 218 V DC
1)
184 ... 218 V DC
1)
184 ... 218 V DC
1)
–
Disconnection on the DC side permits "fast" braking.
• Output current, max.
• 600 mA (with UL approval)
• 1 A (without UL approval)
Permissible mounting position
Horizontal wall mounting and mounting in the horizontal position
Relative humidity
< 95 % RH, condensation not permissible
Cooling
• FSA: Convection
• FSB and FSC: Air cooling as required using the integrated fan
Installation altitude
• Up to 1000 m above sea level without derating
• >1000 m
see derating characteristics
Short Circuit Current Rating
(SCCR)
2)
40 kA
Protection functions
• Undervoltage
• Overvoltage
• Overload
• Ground fault
• Short-circuit
• Stall protection
• Motor blocking protection
• Motor overtemperature
• Inverter overtemperature
• Parameter locking
Compliance with standards
UL 508C (UL list number E121068), CE, C-Tick
CE marking, according to
Low-Voltage Directive 2006/95/EC
© Siemens AG 2014