SIEMENS
5/43
Siemens D 31 · 2015
5
■
Integration
SINAMICS G120 standard inverters
0.37 kW to 250 kW (0.5 hp to 400 hp)
Power Modules
General design information
Inverter comprising a Power Module (PM) and a Control Unit (CU) and
base components (side view)
•
If at all possible, the line filter should be mounted directly
below the inverter
1)
.
•
With lateral mounting, the line-side components have to be
mounted on the left side of the inverter, and the load-side
components on the right side.
•
Braking resistors have to be mounted directly on the control
cabinet wall due to heating issues.
Recommended installation combinations of the inverter and optional power and DC link components
1)
With the PM250 Power Module, frame size FSC, the output reactor and
sine-wave filter cannot be installed as base components. The output
reactor or sine-wave filter should be mounted under the line filter.
Standard inverters
SINAMICS G120
e. g.
Filter
Base components
Mounting
surface or
cabinet wall
G_D011_EN_00187a
CU
PM
Power Module
Base
Lateral mounting
Frame size
Left
of the inverter
(for line-side power components)
Right
of the inverter
(for load-side power components
and DC link components)
FSA and FSB
Line filter
Line reactor
Output reactor and/or
braking resistor
FSC
Line filter
1)
Line reactor
Output reactor and/or
braking resistor
FSD and FSE
Line reactor
Line filter
Output reactor or
sine-wave filter and/or
braking resistor
FSF
–
Line filter and/or
line reactor
Output reactor or
sine-wave filter and/or
braking resistor
FSGX
–
Line filter and/or
line reactor
Output reactor or
sine-wave filter and/or
braking resistor
© Siemens AG 2014