SIEMENS
3/38
Siemens ST PCS 7 · 2017 (Preliminary edition)
3
■
Design
(continued)
Industrial Workstation/IPC
SIMATIC BOX PC
OS Client 627D
Interfaces
•
4 × USB 3.0 (SuperSpeed) external
•
1 × USB 3.0 (SuperSpeed) external, on front (Panel Front
design version only)
•
1 × USB 3.0 (SuperSpeed) internal, e.g. for ASIA license key,
hardlock USB
•
1 × COM1 (RS 232)
•
1 × DVI-I interface (DVI/VGA combined; VGA via adapter
cable)
•
1 × DisplayPort (DVI-D or VGA via adapter cable)
•
2 × Ethernet 10/100/1000 Mbps (RJ45)
•
1 × PCI-Express x16 (185 mm) and 1 × PCI (185 mm), vacant
for expansions
SIMATIC PCS 7 BOX with Panel Front, side and front views
Design versions/expandability
The SIMATIC PCS 7 BOX in standard design is a compact com-
puting unit with HMI devices (mouse, keyboard, process moni-
tor) that can be ordered separately and are connected by means
of integrated ports/interfaces.
The device is equipped with four USB 3.0 ports for mouse and
keyboard as well as additional USB input/output devices, e.g.
chip card reader USB.
Two process monitors can be controlled in multi-monitor mode
via the integrated digital graphic interfaces DVI-I and DVI-D (via
adapter cable at the DisplayPort). The selection of the process
monitors depends on the technical data of the integrated graph-
ics as well as the image formats and resolutions which can be
adjusted in the project editor of the OS software (see section
"Operator System, OS Software, Introduction"),
see page 5/6
.
As an alternative to the SIMATIC PCS 7 BOX in standard design,
we are offering a built-in unit with Panel Front according to
SIMATIC IPC677D which can be mounted in mounting cutouts of
control cabinets, enclosures or consoles as well as on swivel
arms.
With the built-in unit, a panel with 22" TFT display and touch
screen is permanently connected with the computing unit. The
22" TFT display supports a resolution of 1920 × 1080 pixels. An
additional USB 3.0 port for connection of external I/O devices is
available on the panel front on the left below the display.
Using a touch pen as an input aid protects the touch screen and
makes it easy to achieve pin-point accuracy when operating
small input boxes or buttons – especially when working with
gloves.
Touch pen
Diagnostics
•
Integrated diagnostic displays (4 dual-color LEDs for status
display of the operating state)
•
Monitoring and diagnostics functions available in combination
with the SIMATIC IPC DiagMonitor diagnostics software for:
- Temperatures
- Backup battery voltage
- HDD/SSD status (S.M.A.R.T.)
- System status (Watchdog)
- Fan speed
- Operating hours counter
Pre-installed software
The following software is pre-installed on the SIMATIC PCS 7
BOX OS Client 627D on delivery:
•
Windows 10 IoT Enterprise 2015 LTSB 64-bit operating
system, multi-language (English, German, French, Italian,
Spanish, Chinese)
•
SIMATIC PCS 7 OS Software Client
•
SIMATIC IPC DiagMonitor diagnostics software
Note
The license for the SIMATIC PCS 7 OS software client for the
SIMATIC PCS 7 BOX OS Clients is no longer included in the
scope of delivery. As with the SIMATIC PCS 7 Industrial Work-
stations in rack version, it must be purchased separately.
© Siemens AG 2017