SIEMENS
10/37
Siemens MD 50.1 · 2015
Gearbox options
Mounting
Mounting types
10
■
Parallel shaft gearboxes F.AD in a shaft-mounted design
The rubber buffers (supplied loose) are used to flexibly support
the gearbox on the housing plate provided.
When mounting, the rubber buffers must be pretensioned to the
dimension specified in the dimensional drawing.
The elastomer used for support is manufactured out of natural
rubber 70° ± 5 Shore A.
The rubber buffers are suitable for all mounting positions and
can withstand temperatures of between -40 and +80 °C.
The dimensions of the torque arm can be seen in the dimen-
sional drawings.
■
Bevel gearboxes KAD in a shaft-mounted design
The torque arm of bevel gearboxes K is mounted on the under-
side of the housing. The rubber buffers are used to flexibly sup-
port the gearbox on the torque arm.
The elastomer used for support is manufactured out of natural
rubber 60° Shore A.
The rubber elastic buffers are suitable for all mounting positions
and can withstand temperatures of between -40 and +80 °C.
The dimensions of the torque arm can be seen in the dimen-
sional drawings.
■
Bevel gearboxes BAD. in a shaft-mounted design
The torque arm can be screwed to the gearbox housing at
various positions.
The elastomer used for support is manufactured out of natural
rubber 60° Shore A.
The rubber elastic buffers are suitable for all mounting positions
and can withstand temperatures of between -40 and +80 °C.
When ordered, the torque arm is supplied loose.
Fig. 10/8
Bevel gearboxes B in a shaft-mounted design
Article No. at 14th position
Shaft-mounted design
D
Article No. at 14th position
Shaft-mounted design
D
Article No. at 14th position
Shaft-mounted design
D
Sizes BAD.19 and BAD.29
Sizes BAD.39 and BAD.49
30°
8x30°
45°
5x45°
7
4
9
6
1
8
3
2
5
4
6
1
3
2
5
© Siemens AG 2015