SIEMENS
6/39
Siemens CR 1 · 2015
6
Drive systems
SINAMICS S120 built-in devices
Single Motor Modules in booksize format
■
Design
Single Motor Module in booksize format
In principle, all Single Motor Modules can be operated on Basic
Line Modules, Smart Line Modules, or Active Line Modules of the
appropriate voltage range.
A broad range of Single Motor Modules is available graded ac-
cording to current and power.
The Single Motor Modules in booksize format feature the fol-
lowing connections and interfaces as standard:
•
2 DC link connections via integrated DC link busbars
•
1
electronics power supply connection via integrated 24
V DC
busbars
•
3 DRIVE-CLiQ sockets
•
1 motor connection, plug-in (not included in scope of supply)
or screw-stud depending on rated output current
•
1 safe standstill input (enable pulses)
•
1 safe motor brake control
•
1 temperature sensor input (KTY84-130 or PTC)
•
2 PE (protective earth) connections
The status of the Motor Modules is indicated via two multi-color
LEDs.
The motor cable shield is inside the connector on 50 mm
(1.97 in) and 100 mm (3.94 in) wide Motor Modules. A shield
connection plate can be supplied for 150 mm (5.91 in), 200 mm
(7.87 in) and 300 mm (11.8 in) wide Motor Modules. On these
modules, the motor cable shield can be connected using a tube
clip.
The signal cable shield can be connected to the Motor Module
by means of a shield connection terminal, e.g. Weidmüller type
KLBÜ 3-8 SC.
The scope of supply of the Motor Modules includes:
•
DRIVE-CLiQ cable appropriate to the width of the Motor
Module for connection to the adjacent Motor Module,
length = width of Motor Module + 0.06 m (2.4 in)
•
Jumper for connecting the 24 V DC busbar to the adjacent
Motor Module
•
Connector X21
•
Connector X11 for the motor brake connection
(for Motor Modules with a rated output current of 45 A to
200 A)
•
2 blanking plugs for sealing unused DRIVE-CLiQ sockets
•
Fan insert for the 132 A and 200 A Motor Modules
(the voltage for the fan insert is supplied by the Motor Module)
•
1 set of warning signs in 30 languages
•
1 heat conducting foil
(for Motor Modules with cold plate cooling only)
© Siemens AG 2015