SIEMENS
6/25
Siemens CR 1 · 2015
6
Drive systems
SINAMICS S120 built-in devices
STARTER commissioning tool
■
Integration
Data can be exchanged (depending on the version) via
PROFIBUS or PROFINET/Ethernet or via a serial interface.
For commissioning and service, a PG/PC can be connected to
the CU320-2 Control Unit via PROFIBUS. A PROFIBUS connec-
tion must be available with a connecting cable at the PG/PC.
Further, communication between a CU320-2 Control Unit and
PG/PC can also be established via Ethernet, either via an
(optional) CBE20 Communication Board or the Ethernet inter-
face -X127 on the CU320-2 Control Unit.
Note:
The terminal strip -X127 is suitable as a communication link to
the PG/PC only for the purposes of servicing and commissio-
ning.
■
Selection and ordering data
Note:
In addition to the STARTER commissioning tool, SINAMICS Drive
Control Chart (SINAMICS DCC) can be installed. This allows the
device functionality in the SINAMICS drive system to be expan-
ded with technology functions as required.
More information about SINAMICS DCC can be found in section
"SINAMICS Drive Control Chart (SINAMICS DCC)".
Accessories
Depending on the version of the Control Unit (CU), the Control
Unit of the drive unit can communicate with the programming
device (PG) or PC via PROFIBUS or PROFINET/Ethernet or via a
serial interface. The following accessories are available for the
particular drive system as listed in the following table.
■
More information
The STARTER commissioning tool is also available for update
purposes on the Internet at
Description
Article No.
STARTER commissioning tool
for SINAMICS and MICROMASTER
English, French, German, Italian,
Spanish
6SL3072-0AA00-0AG0
Description
Recommended accessories
For communication between
the drive unit and the pro-
gramming device or PC
Article No.
SINAMICS S120
• RS232
SIMATIC S7 connecting
cable
Null modem cable, 6 m
(19.69 ft)
6ES7901-1BF00-0XA0
• PROFIBUS
CP 5711 communication
module
USB adapter for connecting
a PG or notebook to PROFI-
BUS or MPI
USB cable (2 m/6.56 ft) inclu-
ded in scope of supply
6GK1571-1AA00
SIMATIC DP plug-in cable
12 MBaud, for PG connec-
tion, pre-assembled with
2 × 9-pin SUB D connector,
3 m (9.84 ft)
6ES7901-4BD00-0XA0
• PROFINET/
Ethernet
Standard CAT5 Ethernet
cable or PROFINET cable
–
© Siemens AG 2015