NORD DRIVESYSTEMS
6
NORDAC
BASE
SK 180E frequency inverter
NORD bus technology modules make a significant contribution to the construction of
economical and user-friendly drive combinations. These can act as gateways between
the field bus level and the NORD system bus, so that up to 4 frequency inverters can be
controlled by a single bus module. Tunnelling of parameter data enables access to all of
the data records of the frequency inverters. If not all of the frequency inverters need to be
accessed separately, considerably more devices can be controlled in broadcast mode.
NORD CON is the free operating software for controlling, parameterisation and diagnostics
of all NORD frequency inverters and motor starters.
A virtual control unit, analogous to a SimpleBox (optional
control and parameterisation unit), enables the display
of operating values, parameterisation and the control of a
connected frequency inverter.
By means of a convenient overview the user can view and
adjust each available parameter. By means of an appropriate
printing option, parameter lists are generated in printed form
either completely or only with the values which deviate from
the factory settings. The finished data sets can be saved on
a PC / laptop and archived for future use or sent by e-mail.
The NORD CON oscilloscope function is an extremely useful
instrument for the optimum adjustment of drive systems.
By means of line graphs, all drive characteristics (current,
torque, etc.) can be recorded and analysed. On the basis of
the results, fine tuning of the ideal parameter settings of the
relevant drive unit is possible.
A PLC editor is available for creating, editing and managing a PLC program. The PLC
programs can also be tested (debugged) with this editor and communicated to the
frequency inverter.
COMMUNICATION AND DIAGNOSTICS
VIA THE SYSTEM BUS
NORD CON
software control
Parameterisation
Diagnosis
Programming
the PLC
Tunnelling of
parameter data via
the system bus
Field bus
(e.g.
Profibus)